NuTone WS2 manual NON-DUCTED Filters, Operation, Cleaning

Page 6

ALLURE® WS2 SERIES

RANGE HOOD

®

Page 6

NON-DUCTED FILTERS

If hood is to be installed Non-Ducted:

Purchase a set of (2) Non-Ducted Filters from your local distributor or retailer and attach them to the aluminum mesh filters.

NOTE: For models that are installed in the non-ducted mode, the most effective operation is achieved at speeds 1 and 2. These speeds provide the most efficient and quiet operation during cooking, while maximizing the benefits of the recirculating filtration system.

OPERATION

Fan and Lights: 3 push button switches for each. Push any button to select one of 3 fan speeds or one of 3 light levels. Push the same button to turn fan or light off. Press another button to change fan speed or light level. A light above each fan button indicates the fan speed.

Heat Sentry: Your range hood is equipped with the Heat Sentry feature, which monitors temperature. The Heat Sentry will auto- matically turn the fan on at its highest speed when the temperature is above normal.

1)If a fan setting is selected when the Heat Sentry in on, the light above the fan button will flash on and off.

2)If the fan setting is off when the Heat Sentry is on, the light above fan button 3 will flash on and off rapidly.

After the temperature has lowered to normal, the fan will change to the setting prior to the Heat Sentry turning on.

Fuse: The hood control contains a fuse to protect it from power surges. If the fuse has opened (blown), the green fan-level indica- tors will operate properly when the fan buttons/switches are pressed - but the fan and lights will not turn on.

The fuse is a 5 x 20 mm, 10 Amp, Fast-Acting, 125V (min.). Com- mon manufacturer and part numbers are: Littlefuse, 217010; Bussmann, GMA10A; Wickmann, 1942100. Radio Shack, Digikey (1-800-344-4539), and most electronic supply stores have them in stock.

To replace the fuse:

1.Disconnect power at service entrance.

2.Remove filters, bottom panel, light wire harness, and air chute.

3.Remove and inspect fuse. If it is not open (blown), additional diagnostics need to be done.

4.Install new fuse.

5.Re-assemble air chute, light wire harness, bottom panel, and filters.

6.Turn on power and check hood/control operation.

CLEANING

WARNING: To reduce the risk of electric shock, dis- connect from power supply before cleaning.

Aluminum mesh filters: Clean frequently using hot water and a mild detergent. Filters are dishwasher safe.

Charcoal filters: Clean filter surfaces frequently with a damp cloth and a mild detergent. DO NOT immerse filters in water or put in dishwasher. The special “Clean Sense” feature indicates when the filter is to be replaced. The blue and yellow strips will blend to green when it is time to change the filter. The “Clean Sense” feature works best when facing toward the cooking surface.

To clean hood: Remove filters. Use a damp cloth and a mild deter- gent to wipe all grease-laden surfaces. Do not use abrasive cloth, steel wool pads, or scouring powder on the Teflon®-coated bottom cover or on any painted surface. Use care when cleaning blower wheel - it must not become bent or misaligned. DO NOT ALLOW WATER TO ENTER MOTOR. Make sure all surfaces are completely dry before re-installing filters and restoring power.

Motor is permanently lubricated. Do not oil or disassemble motor.

Teflon® is a registered trademark of DuPont.

Image 6
Contents Table of Contents For Domestic Cooking only¼ X Prepare Hood Location Prepare Hood LocationPrepare the Hood FiltersBottom cover Electrical Cable ClampTo Top/Back Edge of hood Connect Wiring Install HoodCleaning NON-DUCTED FiltersOperation Service Parts KEY NO. Part noWarranty Nutone ONE Year Limited WarrantyPara Cocinar Doméstico Solamente Advertencia Precaucion ContenidoPreparación DE LA Campana Preparación DE LA Campana Con dos tornillos Conexión Eléctrica Filtros SIN Conductos OperaciónLimpieza Piezas DE Servicio Clave N.º Pieza N.ºGarantia Garantia Nutone Limitada POR UN AÑO
Related manuals
Manual 16 pages 22.4 Kb

WS2 specifications

NuTone WS2 is a state-of-the-art wireless intercom system designed to enhance communication and convenience within a home. This innovative device seamlessly integrates advanced technologies and user-friendly features, making it a valuable addition to any modern household.

One of the main features of the NuTone WS2 is its wireless connectivity, which eliminates the need for cumbersome wiring. This allows users to place intercom units in various locations throughout the home without the hassle of installation complications typically associated with wired systems. The WS2 operates on a reliable frequency, ensuring clear audio transmission and minimal interference from other electronic devices.

The WS2's crystal-clear sound quality is one of its standout characteristics. Equipped with high-fidelity speakers, it provides crisp and clear audio, which is essential for effective communication. Whether users are talking from one room to another, checking in with family members, or broadcasting messages, the sound remains consistent and is easily understood.

Another significant technology incorporated into the NuTone WS2 is its user-friendly interface. With a simple touch-sensitive keypad, users can navigate through various functions, such as initiating a conversation, adjusting volume levels, and selecting different pre-set channels. This intuitive design ensures that individuals of all ages can operate the system effortlessly.

Additionally, the WS2 is equipped with a dedicated mobile app, which enhances its functionality. This innovative feature allows homeowners to communicate with the intercom system remotely via their smartphones. Users can receive alerts, make announcements, and even engage in conversations from anywhere within their Wi-Fi range, turning their mobile devices into effective communication tools.

The NuTone WS2's sleek, modern design fits seamlessly into contemporary home décor. Its compact form factor and aesthetically pleasing finish ensure that it complements the interior while remaining functional. Furthermore, the flexible mounting options allow users to choose their preferred setup, whether wall-mounted or placed on a countertop.

Security is also a key consideration in the design of the WS2. The system includes features to enhance home safety, such as the option to connect to existing security systems, ensuring that communication is not just limited to intercom tasks but also contributes to overall home monitoring.

In summary, the NuTone WS2 is a versatile and modern intercom system that combines wireless technology, exceptional sound quality, and user-friendly features. Its innovative design and capabilities make it an excellent choice for enhancing communication within any household.