Stand Alone Installation

***This installation only applied with the purchase of a duct cover.

SAFETY WARNING

HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF IT IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.

Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

-Decide the ductwork and locations. Refer to Figure 8.

-Decide the location of the venting pipe from the hood to the outside.

-A straight, short venting run will allow the hood to perform more efficiently.

-Try to avoid as much transitions, elbows, and long run as possible. This may reduce the performance of the hood.

-Use duct tape to seal the joints between pipe sections.

-If necessary, prepare back wall frame with cross framing lumber for secure installation. Using references on Table 2 and measurement on page 16 decide the level of the lumber. Refer to Figure 9.

Figure 8

Figure 9

Hood Preparation before Installation

-Temporarily wire the hood to test for proper operation before installing.

-Peel protective film off the hood and the duct cover (if any).

-Attach the hood-mounting bracket behind the hood with (3/16x3/8 mm) screws (provided) as shown on Figure 10.

Hood Installation

CAUTION: If required to move the cooking range to install the hood, turn off the power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

1.If necessary, attach two rubber stands (provided) with two (4x8 mm) screws (provided) to the back of the hood.

RA3836SQ specifications

Kobe Range Hoods has been a prominent name in the kitchen appliance industry, renowned for its dedication to quality, innovation, and advanced kitchen technologies. Among its impressive product line, the RA3836SQ and RA3830SQ range hoods stand out, offering remarkable features that elevate cooking experiences while ensuring a clean and ventilated space.

The RA3836SQ and RA3830SQ are designed to fit seamlessly in a variety of kitchen styles, offering aesthetic appeal as well as functionality. Both models are constructed from high-quality stainless steel, which not only lends durability but also provides a sleek and modern appearance. The brushed finish helps to resist fingerprints and smudges, making maintenance a breeze.

One of the key features of these range hoods is their powerful ventilation system. With a blower capacity of up to 760 CFM (cubic feet per minute), they efficiently eliminate smoke, odors, and grease from the air, ensuring a clean cooking environment. The three-speed fan settings allow users to adjust the ventilation power according to the cooking needs, whether they are simmering or frying, ensuring that the air quality remains optimal.

Both the RA3836SQ and RA3830SQ models come equipped with quiet operation technology. This feature minimizes noise levels, allowing users to focus on their cooking without the distraction of a loud hood. With noise levels as low as 39 dB on the lowest setting, these range hoods enhance the cooking experience while providing effective ventilation.

Installation is made simple with a ducted or ductless option, catering to various kitchen layouts. The washable aluminum mesh filters are easy to clean, and they trap grease effectively, extending the lifespan of the range hood while promoting better air quality.

In addition, these models feature modern LED lighting, which provides bright, energy-efficient illumination to the cooking area. This not only enhances visibility while preparing meals but also adds to the overall aesthetic of the kitchen.

With thoughtful design, reliable performance, and advanced technologies, the Kobe Range Hoods RA3836SQ and RA3830SQ are excellent choices for those looking to enhance their cooking space. They are a testament to Kobe's commitment to quality and innovation, making them a worthwhile investment for any kitchen.