Kobe Range Hoods IN-026 SERIES installation instructions Preparation Before Installation

Page 7

- For Insert installation -

Preparation Before Installation

Figure 1

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

•Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1.

•A straight, short vent run will allow the hood to perform more efficiently.

•Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

•Temporarily wire the hood to test for proper operation before installing.

•Important: Peel protective film off the hood, if any.

•Use duct tape to seal joints between pipe sections.

CAUTION: If moving the cooking range is Figure 2 necessary to install the hood, turn off the power in an

electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE. And use a protective covering to protect cooktop and/or countertop from damage.

Custom Hood Preparation

1.The custom hood frame must be sized to the shape and weight of the insert. Refer to Measurements and Diagrams on Page 13.

2.It must have a sturdy base (3/4 inch thick plywood recommended) to sustain the weight of insert.

3.If an optional liner will be installed, the side of the wood

frame must be sturdy (3/4 inch thick plywood

Figure 3

recommended).

4.It is recommended to install rear & front stud support (not included). Refer to Figure 2. The rear and front stud support is located 1-1/2” up from the base of the wood frame. For safety purposes, extra installation holes on the side of the insert are provided. Prepare the side stud support if needed.

Liner Installation

5.The custom wood frame must have a sturdy base to accommodate the cut-out for the inset. The base must be recessed to accommodate the height of the liner (See liner dimension on Page 15)

6.Secure the liner to the bottom of the base using screws (not included) appropriate for the size and material of your wood frame.

7.Liner is made up of two sections: a large, rear section with pre-cut for insert and a front section for a total adjustable depth between 23” and 25-3/4”.

8.Position the rear section of the liner so that it aligns with

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Kobe Brand Range Hood Read and Save These Instructions ContentsTOP Grease Fire Important Safety InstructionsPage Liner Sold Separately Components of PackageFor Under the Cabinet InstallationPreparation Before Installation Wiring to Power Supply Hood Installation Final Assembly Operating Instructions Page Page USE Paper Towel on Stainless Steel MaintenanceOptional Accessories SpecificationsMeasurements & Diagrams Page Model no IN2636SQB Parts ListOptional Liner Sold Separately Circuit Diagram Model NO. IN2636SQB Claims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodConsequential Damage ServiceImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationVER.070829

IN-026 SERIES specifications

The Kobe Range Hoods IN-026 Series stands out in the world of kitchen appliances, known for its blend of style, efficiency, and advanced technology. Designed with the modern kitchen in mind, this series features a sleek and contemporary look that complements a variety of kitchen decors while providing exceptional performance.

One of the defining characteristics of the IN-026 Series is its powerful yet efficient motor, which offers exceptional ventilation with optimal airflow. The range hood is designed to effectively remove smoke, odors, and grease from your kitchen, keeping the air fresh and clean during cooking. With a maximum airflow capacity of up to 860 CFM, it ensures that even the most intense cooking sessions do not compromise air quality.

The IN-026 Series utilizes a three-speed fan control, allowing users to adjust the ventilation power according to their cooking needs. This flexibility not only maximizes efficiency but also minimizes noise levels, creating a more pleasant cooking environment. The range hood operates at a quiet level, making it suitable for open-plan kitchens where conversations and ambiance matter.

One of the standout features of the IN-026 Series is its dual-level lighting system. Equipped with energy-efficient LED lights, it illuminates the cooking surface efficiently, enhancing visibility while also adding a stylish touch. The adjustable lighting allows for both functional use and an inviting atmosphere in the kitchen.

In terms of construction, the IN-026 Series is built from high-quality stainless steel, ensuring durability and easy maintenance. The surface is resistant to stains and corrosion, making it easy to clean and maintaining its aesthetic appeal over time. This attention to quality is reflected in the meticulous design, which includes seamless edges and a modern finish.

Furthermore, the IN-026 Series comes with a dishwasher-safe baffle filter that captures grease and particles effectively. This feature not only enhances the performance of the hood but also simplifies the cleaning process, ensuring that maintenance is a breeze.

Overall, the Kobe Range Hoods IN-026 Series combines functionality, aesthetics, and advanced technology, making it a prime choice for anyone looking to elevate their kitchen experience. With its powerful ventilation, stylish design, and user-friendly features, it embodies the perfect balance of performance and elegance in modern kitchen appliances.
Top Page Image Contents