Kobe Range Hoods CH9630SQB, CH9648SQB, CH9642SQB, CH9636SQB To Clean Hood Surface

Page 17

MAINTENANCE

SAFETY WARNING

NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.

For optimal operation, clean range hood and all baffle/spacer/filter/oil tunnel/oil container regularly.

To Clean Hood Surface

CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.

***Regular care will help preserve the appearance of the hood.

1.Use only mild soap or detergent solutions. Dry surfaces using soft cloth.

2.If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of the stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to hood finish. Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots. Use dry soft towel to dry the hood.

3.DO NOT allow deposits to accumulate or remain on the hood.

4.DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface and cause rusting.

5.DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.

To Clean Baffle, Spacer, Filter, Oil Tunnel and Oil Container

CAUTION: DRAIN OIL FROM BAFFLES, SPACER(S), FILTERS, OIL TUNNEL(S) AND OIL CONTAINERS BEFORE OIL AND RESIDUE CAN OVERFLOW.

1.Remove all baffles, spacer(s), filters, oil tunnel(s), and oil containers. Follow directions for installation in reverse.

2.Discard oil and residue.

3.Wash with warm soapy water. Dry thoroughly before replacing.

(Note: Stainless Steel Baffles, Spacer(s) & Oil Tunnel are top rack dishwasher safe.)

15

Image 17
Contents Kobe Brand Range Hood Read ALL Instructions Carefully Before Starting Page Page X 3/8 4 pcs For Under the Cabinet Safety Warning Hood Installation Preparation before InstallationWiring to Power Supply Ductwork InstallationFinal Assembly AccessoriesHood Preparation before Installation Wall Duct Co ver Installation Final Assembly Operation Instructions Page To Clean Hood Surface To Replace Light Bulb Speed Measurements & Diagrams Page Rear Knockout Holes 228 Baffle Filter & Stainless Steel Spacers Body Components 12A 12B 12C 12D12 Blower Assembly Electrical Assembly Processor Board Processor Board Claims will not be Accepted After the Allocated Days Warranty Certificate Email customer.service@KOBERangeHoods.com Kobe Range Hoods Valley Blvd Suite # El Monte, CA 91731 USA

CH9636SQB, CH9642SQB, CH9630SQB, CH9648SQB specifications

Kobe Range Hoods offers a specialized line of high-performance range hoods known for their advanced technology and sleek aesthetics. Among them, the CH9642SQB, CH9648SQB, CH9630SQB, and CH9636SQB models stand out due to their robust design and array of features tailored for modern kitchens.

The CH9642SQB, with a width of 42 inches, is designed to efficiently handle high-volume cooking while minimizing noise. This range hood features a powerful 900 CFM blower, ensuring that even the most intense cooking smells and smoke are quickly vented. It is equipped with a 3-speed fan control that allows users to adjust the airflow according to their needs, providing a customizable cooking environment. The seamless stainless steel construction not only offers durability but also adds contemporary elegance to any kitchen.

Moving to the CH9648SQB, which spans 48 inches, this model caters to larger cooking surfaces and boasts the same powerful 900 CFM blower. Its baffle filters are dishwasher-safe, making maintenance easy while ensuring effective grease capture. Additionally, this model introduces advanced sound control technology, ensuring quieter operation without compromising performance.

The CH9630SQB, with a 30-inch profile, is ideal for smaller kitchens while still maintaining impressive capabilities. It features a 650 CFM blower that provides ample power, along with an adjustable fan to cater to various cooking scenarios. With its compact design, the CH9630SQB fits snugly into tighter spaces without losing out on functionality. The elegant touch panel controls offer a modern touch, enhancing user convenience.

Finally, the CH9636SQB, at 36 inches, combines the ideal balance of performance and style. Featuring a 750 CFM blower, this model is suitable for many cooking types, from stir-frying to simmering. The built-in LED lighting enhances visibility for safer cooking and adds a stylish flair. Its easy-to-clean baffle filters ensure that the unit remains hygienic and efficient.

In summary, all four models from Kobe Range Hoods reflect a commitment to quality, performance, and design. They incorporate user-friendly technologies, superior airflow, and easy maintenance features that make them suitable for any kitchen style and size. Whether you choose the CH9642SQB, CH9648SQB, CH9630SQB, or CH9636SQB, you can expect a blend of functionality and elegance that elevates your cooking experience.