Kobe Range Hoods CH9136SQB, CH9148SQB To Avoid Damage to Your, HOOD, Prevent Debris from Entering

Page 10

STAND ALONE INSTALLATION

***This installation only applied withFigurethe 8 purchase of a duct cover (Model No. RA1020DC).

Preparation before Installation

NOTE:

TO AVOID DAMAGE TO YOUR

 

HOOD, PREVENT

DEBRIS FROM

 

ENTERING THE

VENT OPENING.

∙Decide the location of the venting pipe from the hood to the outside. (Figure 1)

∙A straight, short venting run will allow

 

the hood to perform more efficiently.

∙

Figure 9

 

Try to avoid as many transitions,

 

elbows, and long run as possible. This

 

may reduce the performance of the

 

hood.

∙Use duct tape to seal the joints between pipe sections.

∙If necessary, prepare back wall frame with cross framing lumber for secure installation.

∙Using references on Table 2 and measurements on page13, decide the level of the lumber. (Figure 2)

Hood Preparation before Installation

Figure 10

∙Temporarily wire the hood to test for proper operation before installing.

∙Important: Peel protective film off the hood and the duct cover (if any).

∙If necessary, attach two rubber stands (provided) with two (4 x screws8mm)

(provided) to the back of the hood.

∙Attach the hood-mounting bracket to the back of the hood with six (3/16￿ x 3/8￿) screws (provided) as shown In Figure 10.

Hood Installation

Figure 11

CAUTION: If required to move the cooking range to install the hood, turn off the power on an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING

A GAS RANGE.

1.Using references on Table 2 and measurements on page 14-15, mark the leveling point of the hood. Position two

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Kobe Brand Range Hood Read and Save These Instructions Page What to Do In The Event Of a Range Top Grease Fire Components of Package Range Hood BOXInstallation Please Read Entire Instructions Before ProceedingSafety Warning GAS Range Prevent Debris From Entering Vent OpeningSure the Hood is Secure Before Releasing Wiring to Power Supply To Avoid Damage to Your HOOD, Prevent Debris from EnteringDuct Cover Installation Accessories Turn on Operation InstructionsTurn OFF Maintenance    Specifications Consumption / AmpereMeasurements & Diagrams Model no CH9130SQBRear Knockout Holes Parts List Model NO. CH9130SQB CH9136SQB CH9142SQB CH9148SQBOptional Duct Cover Model NO. CH9130SQB CH9136SQB Model no Circuit Diagram Model NO. CH9130 SQB CH9136SQBModel NO. CH9142 SQB CH9148SQB Disclaimer Claims will not be Accepted After the Allocated DaysTWO-YEAR Warranty Service Period WarrantyWarranty Certificate ConditionsConsequential Damage ServiceTo YOU Implied WARRANTIES/STATE LAW Product Registration Record the Following Information for Your Record

CH-191, CH9130SQB, CH9142SQB, CH9148SQB, CH9136SQB specifications

Kobe Range Hoods are known for their premium quality and innovative technology, making them a favorite in modern kitchens. Among their impressive lineup, the CH-191, CH9136SQB, CH9130SQB, CH9148SQB, and CH9142SQB models stand out for their functionality, design, and performance.

The CH-191 model features a sleek under-cabinet design that easily integrates into any kitchen decor. Its powerful 680 CFM internal blower can efficiently remove smoke, steam, and odors, ensuring a fresh cooking environment. This range hood is equipped with a 3-speed fan control, allowing users to adjust the ventilation according to their cooking needs. The stainless steel construction not only enhances durability but also adds a modern aesthetic appeal. Additionally, the CH-191 incorporates a dishwasher-safe baffle filter, making maintenance hassle-free.

The CH9136SQB is a chimney-style range hood that boasts a contemporary square design, perfect for those looking to make a statement in their kitchen. It features a robust 900 CFM blower, ideal for heavy-duty cooking tasks. This model also includes variable speed settings to customize airflow, and it operates quietly, ensuring a peaceful cooking experience. The LED lighting enhances visibility while cooking, and the stainless steel construction provides a professional finish that’s easy to clean.

For those who prefer a compact option, the CH9130SQB offers a blend of power and efficiency in a smaller footprint. With a 750 CFM blower and multiple fan speeds, it caters to standard cooking requirements without overwhelming space. The LED lights and stainless steel finish add functional elegance to any kitchen setup.

The CH9148SQB model takes performance further with advanced features such as an integrated wireless remote control for convenience. This chimney-style range hood delivers an impressive 1200 CFM airflow capacity, suitable for large kitchens and serious cooks. Its powerful suction capabilities, combined with stainless steel baffle filters, ensure maximum grease capture and ease of cleaning.

Finally, the CH9142SQB model is designed for versatility with its 900 CFM blower and modern aesthetic. It also features a touch control panel for easy operation and adjustable lighting. This model uniquely balances design and functionality, making it an ideal choice for a stylish yet practical kitchen environment.

Together, these Kobe Range Hoods offer exceptional quality, advanced technology, and modern design, making them perfect for any culinary enthusiast looking to elevate their cooking space. Whether it's for a small kitchen or a spacious culinary haven, Kobe has the ideal solution to meet the cooking and aesthetic demands of modern life.
Top Page Image Contents