JVC AV-21CG14 TV channel presetting, To register the TV channels auto- matically, Menu Install

TV channel presetting

To register the TV channels auto- matically

You can register the TV channels into the TV’s channel list automatically.

1 Display the INSTALL menu.

❇MENU INSTALL

2 Choose AUTO PROGRAM, then press the MENU/OK button.

AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically.

3 “SETUP TOUR RESTART?” appears.

To start the		Press the MENU/OK button.
SETUP TOUR		Then proceed to step 5 of
		“Setting up your TV” on page
		7.
	To skip the	Press the Red button.
SETUP TOUR
4 The EDIT menu appears.
To edit the		Proceed to the Step 3 of “To
channel list		edit the channel list (PR list)”
		on this page.
	If a channel is	Proceed to the Step 3 of “To
	not registered	register the channel manually”
		on this page.

To exit the menu Press the MENU/OK button.

For details of “SETUP TOUR”, see page 7.

To register the TV channels manually (MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.

1 Display the INSTALL menu.

❇MENU INSTALL

2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.

EDIT

PRCH/CC

7CH 09

8CH 11

9 ■CH 13 3

10

11

12

13

3 Choose the channel which you want to register.

4 Press the blue button to activate the MANUAL function.

The sound system of the channel appears at the right of the CH/CC number.

5 Press the 3 button to choose an appropri- ate sound system.

For details, see “SOUND SYSTEM” on page 10.

6 Press the green or red button to search for the TV channel.

Searching stops when a channel is found and displayed.

7 Repeat step 5 until your desired TV channel appears.

If the reception	Press the blue or yellow button
is poor	to fine tune the TV channel.
If noisy sound	Press the 3 button to choose
is heard	an appropriate sound system.

8 Press the MENU/OK button to exit the menu.

To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)

You can edit the TV channel list as you like.

Note: After this operation, other channel’s PR numbers will be changed.

1 Display the INSTALL menu.

❇MENU INSTALL

2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears.

EDIT

PRCH/CC

7CH 09

8CH 11

9 ■CH 13 3

10

11

12

13

3 Choose the channel which you want to change PR number, or delete.

4 Do the following action:

To change the	Press the 3 button. Then move
PR number	it to the PR number you want
(MOVE)	to use it for the channel.
	Finally press the 2 button.
To delete the	Press the yellow button.
channel (DELETE)

5 Press the MENU/OK button to exit the menu.

❇About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4.

13