Bard QWS48A-23, QWS48A-19, QWS48A- 16, QWS48A-30 Attachment of Wall Sleeve to Qtec Unit

Page 10

ATTACHMENT OF WALL SLEEVE TO QTEC UNIT

All Wall Sleeve Models covered in this manual are equipped with two different methods to attach the QTEC Model being applied.

The first method is with brackets supplied with the QTEC unit. These brackets are screwed to the sleeve side with six screws per side. This method can be used if adequate clearance is available on each side of the unit to drive the screws. If this method is used, the studs attached to the wall sleeve must me removed and discarded.

The second method is for installation where there is not adequate clearance to drive the screws into the cabinet sides. The attachment can be made from inside the unit. There are two threaded studs extending from the room side of the sleeve to matching holes in the unit rear panel, and are secured with a 5/16" nut on each side. See Figure 3.

FIGURE 8

ATTACHING BASE ASSEMBLY TO SLEEVE

SHOWING CAULKING

To use this method, discard the two side mounting brackets. Remove the nuts and washers from the threaded studs and retain for use later. Remove the lower cabinet door and locate the mating holes in the rear of the cabinet. It may be necessary to clear the holes of gasket material.

Roll unit into place making sure the unit is aligned from side to side and that studs have entered the holes in the cabinet back. Push unit back until the rubber seal on the rear of the cabinet touches the flange on the wall sleeve. Replace the washers and nuts previously removed from the studs. Tighten nuts until there is some compression of the gasket. Replace the lower cabinet panel.

ATTATCH BASE ASSEMBLY TO SLEEVE

SEAL BETWEEN SLEEVE & BRACKET WITH SEALANT AS SHOWN

SEAL CORNER OF BRACKET WITH SEALANT AS SHOWN

MIS-1848

Manual

2100-319F

Page

10 of 10

Page 9 Page 10
Image 10
Page 9 Page 10
Contents INSTRUCTIONSQWS48A-16QWS48A-19 QWS48A-23 QWS48A-30 Contents Getting Other Information and Publications For More INFORMATION, Contact These PublishersShipping Damage Installation Wood Framed WallsWood Framed Installation GeneralApplication of Sealant to 2 X 6 Plate Application of Sealant to FlangesInstallation Masonry Construction Walls Masonry Construction InstallationTypical Installation with 14 MAX. Wall Thickness Installation with 19 Thick Walls Installation with 16 Thick WallsInstallation with 23 Thick Walls Installation with 30 Thick WallsAccessory Item QCDS48 Condensate Disposal SystemAttaching Base Assembly to Sleeve Showing Caulking Attachment of Wall Sleeve to Qtec Unit

QWS48A, QWS48A-30, QWS48A- 16, QWS48A-19, QWS48A-23 specifications

The Bard QWS series of units, including the QWS48A-23, QWS48A-19, QWS48A, QWS48A-16, and QWS48A-30, represents a cutting-edge range of climate control solutions designed for both residential and commercial applications. These models are known for their energy efficiency, advanced technologies, and user-friendly features, making them a popular choice among consumers seeking reliable indoor climate management.

One of the defining characteristics of the QWS series is its use of inverter technology. This allows the units to adjust their cooling or heating output based on current temperature needs, leading to significant energy savings and maintaining a consistent indoor environment. The inverter systems also reduce the amount of noise produced during operation, creating a more pleasant living or working atmosphere.

The units are equipped with multi-stage filtration systems, ensuring clean air quality by capturing dust, allergens, and other particulate matter. This is particularly beneficial for individuals with respiratory issues or allergies, offering peace of mind and comfort.

Another notable feature of the QWS48A series is its smart home compatibility. These models can easily integrate with home automation systems, allowing users to control climate settings remotely through mobile apps or smart home devices. This connectivity ensures that the indoor environment can be managed effortlessly, providing comfort at any time.

In terms of design, the QWS48A series boasts a modern aesthetic that seamlessly blends into any decor. Many models feature a compact design that allows for flexible installation options, making them suitable for a variety of spaces, from small apartments to larger commercial environments.

All units in the QWS48A range come with energy-efficient ratings, highlighting their low power consumption and environmental consciousness. They are compliant with the latest energy standards, helping users reduce their carbon footprint while enjoying the comforts of advanced climate control.

Moreover, the QWS48A models are designed for durability, incorporating high-quality materials that withstand wear and tear. Features such as corrosion-resistant coatings and robust components contribute to their longevity, ensuring reliable operation over the years.

In summary, the Bard QWS series, specifically models like the QWS48A-23, QWS48A-19, QWS48A, QWS48A-16, and QWS48A-30, represents a sophisticated choice for efficient heating and cooling. With their inverter technology, superior filtration, smart home integration, and energy efficiency, these units meet modern demands for comfort, convenience, and sustainability.
Top Page Image Contents