Zanussi BCF64A, 110723 dimensions Zanussi

�The control unit provides several operating settings: time/core temperature according to NF and UK regulations, time/air temperature/probe personalised according to national regulations, sterilizing cycle: UV lamps built-in (on request), 3 single sensor or

3-sensor temperature probes (as accessory), ideal for meats, automatic defrosting and manual defrosting. All parameters are programmable.

�The control unit provides two large displays to read out: time, core temperature, residual time, alarms, service information.

�Two customizable cycles for each operating modes, allowing setting time and air temperature. These two programs (P1-P2) can be converted into ice-cream specialist cycles (shape maintenance and holding).

�All information related to the different operating models are recorded: date, time, cycle, core

temperature, holding temperature, HACCP accordance.

�An audible alarm starts when the cycle ends or terminates abnormally.

�Chilling times can vary according to food quantity, density, moisture contents and type of containers.

�Internal and external finishing in 304 AISI stainless steel and backpanel in galvanized steel.

�HCFC, CFC and HFC free insulation (Cyclopentane), HCFC and CFC free refrigerant gas (R404a).

�Developed and produced in ISO 9001 and ISO 14001 certified factory.

�Inner cell with rounded corners.

�Door equipped with removable magnetic gasket with hygienic design.

�Evaporator with antirust protection.

�Ventilator swinging panel foreasy access to the evaporator.

�Automatic heated door frame.

ACTIVE BLAST CHILLER / FREEZERS

56 KG - 20 GN 1/1

�Hot gas defrosting system.

�Thermostatic expansion valve to optimize the cooling unit efficiency.

�Adjustable feet 150 mm high.

�Stand alone printer as accessory.

�PC connection as accessory, gate RS 485. No water connections required: Waste water can be plumbed into drain, but can also be collected in an optional waste container.

OPTIONAL ACCESSORIES
ACCESSORIES	MODELS
	BCF64A
	110723
3-SENSOR PROBE FOR CHILLER+C/FREEZER	880088
60-MM PITCH ROLL-IN RACK FOR 20X1/1	922203
80MM PITCH ROLL-IN RACK 14X1/1GN	922205
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF	880269
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW	880183
KIT HACCP EKIS	922166
PAIR OF 1/1 GN AISI 304 S/S GRIDS	921101
PLASTIC COATED GRID-600X400 MM	880864
PRINTER FOR HACCP BASIC VERSION	881532
RACK RAILS FOR VERTICAL BLAST CHILLER	881182	ZANUSSI
RILSAN COATED GRID	881061
REMOVABLE TRAY SUPPORT RACK FOR 20 GN1/1	881010
		P R O F E S S I O N A L
TROLLEY FOR 20X1/1 ROLL-IN RACK	922132

www.zanussiprofessional.com

DCB03 2009-09-23 The Company reserves the right to alter technical specifications without prior notice.