Zanussi ZKG5020 Leveling the appliance, Connecting to gas supply, Fitting the stability bracket

Page 29

•Curtains must not be fitted immediately behind the appliance or within 150mm of the sides of the hotplate. If fitted next to or between two base units a minimum space of 1mm must be left between each unit and the sides of the appliance. The hotplate must be set to a minimum of 7mm above the adjacent units. (Note: The leveling feet fitted to the appliance will achieve a nominal height of 907mm -5+ 13mm. Base units not meeting the above conditions must be a minimum of 100mm away from the hotplate.

Leveling the appliance

•Adjustment to suit floor conditions or height is obtained by rotating clockwise or anti clockwise the feet at the front and rear of the appliance. A spirit level should be placed on one of the shelves to confirm the appliance is correctly leveled.

Connecting to gas supply

•This appliance is designed to be installed with an appliance flexible connection only.

•Supply piping should not be less than R3/8. Connection is made to the Rc ½ (½” B.S.P.) female threaded entry pipe located just below the hob level on the rear left hand side of the appliance.

IMPORTANT!

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

•Carry out a gas tightness test after connecting to the gas supply.

•The gas bayonet connector must be fitted in the shaded area indicated.

 

650mm

250mm

400mm

 

200mm

•Take into account that it must be possible to pull the appliance forward sufficiently. Ensure the hose does not become trapped when pushing the appliance into position.

IMPORTANT!

FLEXIBLE TUBING USED MUST COMPLY WITH BS.669 CURRENT EDITION.

Fitting the stability bracket

•It is recommended that if the appliance is to be installed with a flexible supply pipe, a stability bracket be fitted and is available from your supplier (see Important Safety Requirements). These instructions should be read in conjunction with any leaflet packed with the stability bracket.

1.Place the appliance in its intended position and level appliance.

2.Mark off 250mm from the left hand side of the appliance as shown in dimension 'A'. This is the centre line of the fixing bracket.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model ZKG5020 Contents Installation Important safety instructionsChild safety During useCleaning and maintenance Controls and their functions Product descriptionCookware Before using the appliance Rating plateCondensation and steam Grill and oven furniture To turn off any burner HobTo light the hob burners Hints and tips Things to noteTo turn off the grill Using the grillGrill To Remove. Press Grill pan and handleFood Grilling chartMain oven Using the main ovenHeat zones To fit the main oven shelvesTo turn the main oven off Food Gas mark Pos Oven cooking chartFood Oven cooking chartCooking time Roasting chartSlow cook Using slow cookGeneral points Food preparation slow cookingCleaning materials Care and cleaningCleaning the outside of the appliance Cleaning the hobCleaning the grill Cleaning the grill and oven furnitureCleaning between the outer and inner door glass Cleaning the doorsTo replace the outer door glass To clean the glass door panelsProblem TroubleshootingPossible Solution Technical dataHob Natural Gas Provision for ventilation Installation instructionsLocation of appliance For your safetyMoving your appliance Fitting the stability bracket Connecting to gas supplyLeveling the appliance Pressure testing BatteryChecking the main oven Checking the grillChecking the hob General noteAt the end of the appliances life EnvironmentStandard guarantee conditions Guarantee / Customer carePage Page 311801700 311801400

ZKG5020 specifications

The Zanussi ZKG5020 is a stylish and efficient built-in gas hob designed to elevate your cooking experience. This contemporary appliance features a sleek aesthetic, complementing modern kitchen designs while offering a range of practical features that enhance functionality.

One of the standout features of the Zanussi ZKG5020 is its high-efficiency burners. With gas burners designed to deliver rapid heat, cooking times are significantly reduced, allowing you to prepare meals quickly and effectively. The hob includes a range of burner sizes, making it versatile enough to accommodate anything from simmering sauces to boiling pasta or frying meats. The powerful wok burner is particularly notable, delivering high heat for stir-frying and other intensive cooking methods.

The temperature control on the ZKG5020 is precise and responsive, providing you with the flexibility to adjust the heat according to your cooking requirements. Whether you’re looking for a gentle simmer or a full boil, this hob allows you to achieve your desired results with ease.

Safety is a paramount consideration in the design of the Zanussi ZKG5020. It incorporates an automatic ignition system that lights the burners quickly and reliably. Additionally, each burner features a flame failure safety device, which automatically cuts off the gas supply if the flame goes out, ensuring peace of mind while cooking.

The surface of the hob is made from durable materials, designed to withstand the rigors of daily use. The stainless steel finish not only contributes to a modern look but also makes cleaning after cooking straightforward. The removable enamel supports provide stability for pots and pans while being easy to maintain.

Moreover, the Zanussi ZKG5020 is designed for convenient installation, featuring a built-in design that seamlessly integrates into your kitchen worktop. Its dimensions make it suitable for various kitchen layouts, maximizing the efficient use of space.

In summary, the Zanussi ZKG5020 is an excellent choice for home cooks who value style, efficiency, and safety. With its modern design, high-performance burners, and user-friendly features, it promises to enhance any culinary experience, making it a worthy addition to contemporary kitchens.
Top Page Image Contents