Zanussi ZCM900X manual Instructions for the Installer, Connection to gas supply

Page 18

INSTRUCTIONS FOR THE INSTALLER

SAFETY ADVICE

￿￿Before installation ensure that the local distribution conditions (gas type and pressure) and the same as those stated on the rating plate of the appliance.

￿￿This appliance must be installed only in a room with good ventilation.

￿￿This appliance must not connected to a flu. It has to be installed and connected in accordance with the rules in force. Special attention should be paid to the applicable disposal concerning ventilation.

￿￿The adjacent furniture panels have to be heat proof or protected by such material.

￿￿The adjusting conditions of this appliance are mentioned on the rating plate.

Connection to gas supply.

Check that the gas flow and the diameter of the supply pipe is sufficient to supply all the appliances of the installation.

￿￿Check that all connections are tight.

￿￿Install an accessible and visible gas tap to isolate the appliance.

This appliance utilises a threaded ½” gas cylindrical male fitting according to UNI-ISO 228-1.

To connect the appliance to the gas supply with a flexible rubber hose, a supplemental hose nipple fitting is needed which is supplied with the appliance.

-Installation of flues and ventilation for gas appliances of rated input not exceeding 60 kW (1st, 2nd and 3rd family gases) – Part 2 Specification for installation of ventilation for gas appliances – BS 5440;

-Gas burning appliances – Part 3 Domestic cooking appliances burning gas – BS 5386;

-Specification for installation of low pressure gas pipe work of up to 20mm (R1) in domestic premises (2nd family gas)

– BS 6891;

-Pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) – BS 21: 1985;

-Flexible hoses, end fittings and sockets for gas burning appliances – BS 669;

-Installation of domestic gas cooking appliances (1st, 2nd and 3rd family gases) – BS 6172: 1990;

18

An adapter to covert the Gas Inlet from ½” BSP parallel thread to ½” BSP tapered (conical) thread is supplied, including washers. Ensure this is correctly fitted on installation.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Mixed Fuel Cooker ZCM900X Important Safety Information Contents Model ZCM900X Description of the ApplianceHob Control panelThermostat control knob Using the ApplianceOven function control knob Thermostat control lightMain oven light Oven thermostat pilot lightEven Heating for Baking Lower TemperaturesFaster Preheating Food Shelf Position Temp CGrilling BrowningCondensation and steam CookwareIgnition of the burners If there is a power failureHob Burners Extinguishing of burnersBurner Diameter mm Using the Minute MinderSelecting the Correct Burner Double 220 226 Ring Rapid 180 260 Semi 140 Auxiliary 120Cleaning materials External cleaningOven Cavity BurnersReplacing the Light Bulb Symptoms Solutions Something not WorkingService & Spare Parts Customer CareEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsTechnical Features Instructions for the Installer Connection to gas supplyElectrical Connections This Cooker Must be EarthedBefore connecting check that Supply CableSupply cable must not run across the back of the oven Technical Data InstallationTable no.1 Ventilation GAS Connections Rigid ConnectionReplace the nozzles of the hob burners Adjustment of minimum level for the hob burnersGAS Conversion Hob burnersFor LPG screw completely the by-pass screw Page Page 310084

ZCM900X specifications

The Zanussi ZCM900X is a versatile and efficient cooking appliance designed to cater to the needs of both home chefs and busy families. This contemporary model combines modern aesthetics with functional performance, making it a valuable addition to any kitchen.

One of the standout features of the Zanussi ZCM900X is its dual-fuel capability. This appliance combines a gas hob with an electric oven, providing the best of both worlds. The gas burners offer instant heat and precise temperature control, ideal for quick stir-frying or achieving the perfect simmer. Meanwhile, the electric oven ensures even cooking, making it perfect for baking bread, roasting meats, or preparing casseroles.

The hob features four gas burners along with a stylish stainless steel finish that not only complements modern kitchen designs but is also easy to clean. Each burner comes with a flame failure safety device, ensuring peace of mind while cooking by automatically shutting off the gas supply if the flame is extinguished.

In addition to its gas burners, the Zanussi ZCM900X boasts a spacious electric oven with a generous capacity, allowing users to cook multiple dishes simultaneously. The oven's fan-assisted design helps distribute heat evenly, reducing cooking times and promoting uniform results. The appliance includes multiple cooking functions, including conventional cooking, grilling, and baking, offering flexibility for a wide range of recipes.

Another key technology feature of the ZCM900X is its programmable timer. This handy function allows users to set cooking times and receive alerts when dishes are ready, taking the guesswork out of cooking. Additionally, the oven comes equipped with a light, allowing for easy monitoring of the cooking process without having to open the door and lose heat.

Easy maintenance is also a highlight of this model. The removable oven door and smooth surfaces prevent the build-up of grime, while the enamel interior of the oven simplifies cleaning, making it easier to keep the appliance in pristine condition.

Overall, the Zanussi ZCM900X is a well-rounded cooking solution that merges modern design with reliable functionality. With its combination of gas and electric cooking options, user-friendly features, and comprehensive safety measures, it is a perfect choice for anyone looking to elevate their cooking experience in the kitchen.
Top Page Image Contents