Zanussi ZCG 611 manual Fitting the Stability Bracket Not supplied, Connecting to Gas

Page 19

 

 

300 mm.

 

 

WALL FACE

 

 

 

 

 

 

 

BACK OF COOKER

580 mm.

mm.

 

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

 

STABILITY BRACKET

 

100

 

 

 

 

 

 

 

 

A

BASE OF COOKER

 

 

 

 

 

PENCIL LINE ON THE FLOOR

 

 

 

 

 

295 mm.

 

 

 

PLAN VIEW OF THE COOKER

 

SIDE VIEW

FO 0179

 

OF THE COOKER

 

 

 

 

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted. (See Safety Requirements: Page 22).

If a stability bracket is to be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place the cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Mixed Fuel Cooker Important Safety Information Description of the Cooker ContentsFitting the Splash back AccessoriesControl Panel Oven CavityOven Function Control Knob OperationGas oven and Electric grill Hob burnersThings to note Setting the time of dayChild Safety Symbol Hour ClockSetting the minute minder Night dimming function Child Safety Mode only in models with fully electric ovenBefore the First Use of the Cooker Using the OvenHints and Tips Effects of dishes on cooking results Using the Gas ovenOven safety device Before using your ovenRoasting Meat Food Temperatures Shelf Cooking Position Time PuddingsCakes Yeast MixturesHints and Tips How to Use the GrillCooking chart GrillingCleaning the Oven Maintenance and CleaningUnder no Circumstances should the Flame Spreader be Removed Cleaning around the flame spreaderOven Shelves Replacing the Oven LightSymptom Solution Service and Spare PartsSomething Not Working Customer Care Department Guarantee ConditionsZanussi guarantee conditions Customer Care DepartmentDimensions Oven Instructions for the InstallerImportant Safety Requirements Technical Data HobPositioning the Appliance Fig InstallationFitting the Stability Bracket Not supplied Connecting to GasPermanent Connection Electrical connectionsThis Cooker Must be Earthed Commissioning Conversion from Natural to LPG Gas Replacement of gas oven burner nozzleMinimum level adjustment of gas oven burner To Adjust the GAS RatePage Customer Care

ZCG 611 specifications

The Zanussi ZCG 611 is a robust and versatile gas cooker designed to meet the culinary needs of modern households. Combining efficiency with style, this appliance is an ideal choice for those who appreciate both aesthetics and functionality in their kitchen.

One of the standout features of the Zanussi ZCG 611 is its four gas burners, which offer varied cooking options to suit different culinary techniques. Each burner is designed to provide precise heat control, allowing for simmering, boiling, and everything in between. This flexibility enables home cooks to prepare a wide range of dishes, from delicate sauces to hearty stews, with ease.

The cooker also comes equipped with a spacious electric oven that boasts a large capacity, making it perfect for family meals or gatherings. The oven features multiple cooking functions, such as conventional heat, grill, and fan-assisted cooking, ensuring that users can achieve optimal results for any recipe. The fan-assisted cooking function promotes even heat distribution, which helps reduce cooking times and enhances the overall cooking experience.

Another notable characteristic of the Zanussi ZCG 611 is its ease of use. The appliance includes straightforward control knobs that provide precise temperature settings and cooking times. Additionally, the oven is fitted with an easy-to-read timer, ensuring that users can keep track of their cooking without any hassle.

Safety is a primary consideration in the design of the Zanussi ZCG 611. The appliance features a flame failure safety device, which automatically cuts off the gas supply if the flame is accidentally extinguished. This feature provides peace of mind for users, especially in busy kitchens.

Maintaining cleanliness is crucial for any kitchen appliance. The Zanussi ZCG 611 is constructed with easy-to-clean surfaces and removable oven parts, facilitating effortless maintenance. This attention to cleanliness ensures that users can enjoy their cooking experience without the worry of lingering food residues.

In summary, the Zanussi ZCG 611 gas cooker stands out for its blend of practicality and modern design. With its efficient cooking features, spacious oven capacity, user-friendly controls, and safety mechanisms, it caters to both novice cooks and seasoned chefs. This appliance is an excellent addition to any kitchen, enabling users to create delicious meals with confidence and ease.
Top Page Image Contents