Zanussi ZCM 620 X manual Connecting to Gas, Wall Face

Page 27

 

 

300 mm.

 

WALL FACE

 

 

 

 

 

BACK OF COOKER

480 mm.

mm.

 

ENGAGEMENT EDGE FOR

LEVELLING FEET

STABILITY BRACKET

 

100

 

 

 

 

 

 

BASE OF COOKER

 

 

 

A

 

PENCIL LINE ON THE FLOOR

 

 

 

 

295 mm.

 

 

PLAN VIEW OF THE COOKER

SIDE VIEW

FO 0179

OF THE COOKER

Fig. 2

Fitting the Stability Bracket (Not supplied)

If the cooker has to be installed with a flexible supply pipe, it is necessary that a stability device is fitted.

(See safety Requirements: Page 25).

If a stability bracket should be fitted by the installer, these instructions should be read in conjunction with the leaflet packed with the stability bracket.

Place cooker in its intended position and level cooker.

Mark off 295mm (11 1/2") from the right hand side of the cooker as shown, this is the centre line of the bracket fixing.

Draw a line 100mm (4") from the front edge of the levelling feet (see Fig. 2a) and remove cooker from its position. Mark off 480mm (19") back from this line on the centre line of the bracket to locate the front edge of the lower bracket.

Fix lower bracket (with two fixing holes) to the floor, then measure height from floor level to engagement edge on back of cooker, dimension 'A' of Fig. 2.

Assemble upper bracket to lower bracket so that underside of bracket is dimension 'A' +3mm (1/8") above floor level. Re-position cooker and check that top bracket engages into cooker back to a depth of 75mm (3"), as shown in Fig. 2.

Should the stability bracket currently installed not allow the cooker to stand correctly, ask the installer to replace it with the correct type.

Connecting to Gas

This cooker is designed to be installed with an appliance flexible connection. Connection is made to the RC 1/2 (1/2" B.S.P.) threaded entry pipe located just below the hotplate level on the rear right-hand side of the cooker. Check for gas soundness after connecting the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in the diagram. Take into account that it must be possible to pull the cooker forward sufficiently. The hose must not get caught on the stability bracket.

Note:

For certain types of gas bayonet connection used, it may not be possible for the appliance to be pushed fully back to the wall stops.

Important:

Flexible tubing MUST comply with BS.669 Current Edition.

600

 

 

450

 

130

FO 0180

Fig. 3

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Mixed Fuel Cooker During Use Important Safety InformationChild Safety ServiceContents Fitting the Splash back Description of the CookerControl Panel AccessoriesControls InstallationWhen the Cooker is First Installed OperationOven Function Control Knob Hour Clock and TimerAuto Symbol Electric OvenTo SET the Time of DAY To SET the Minute MinderManual Function To SET the Timer to Switch OFF only To SET the Timer to Switch the Oven on and OFFTo Cancel a Programme Before the First Use of the Cooker Using the OvenCookware From the oven when opening the oven door toHints andTips Condensation and steamUsing the Conventional Oven How to Use Conventional OvenThings to Note Food Thermostat Runner Time Cooking ChartUsing the Fan Oven Lower TemperaturesEven Heating for Baking Meat Thermostat Cooking Roasting ChartHints andTips Defrosting How to Use DefrostingGrilling How to Use the GrillBurners Maintenance and CleaningHobTop Pan SupportsCleaning the Oven Cleaning materialsExternal cleaning Oven lamp replacement Oven CavityOven Shelves Something Not Working Symptom SolutionCustomer Care Service and Spare PartsZanussi Guarantee Conditions Peace of Mind for 12 MonthsHob Instructions for the InstallerDimensions Appliance Category II 2H3+Positioning the Cooker Important Safety RequirementsProvision forVentilation LocationInstallation Wall Face Connecting to GasThis Cooker Must be Earthed Electrical connectionsProcedure Pressure TestingCommissioning Method To Adjust the GAS Rate

ZCM 620 X specifications

The Zanussi ZCM 620 X is a stylish and functional freestanding cooker that seamlessly combines modern design with user-friendly features, making it an excellent addition to any kitchen. With its sleek stainless steel finish, this cooker exudes a contemporary aesthetic while ensuring durability and ease of maintenance.

One of the standout features of the ZCM 620 X is its multifaceted cooking options. This model comes equipped with a conventional oven, which provides even heat distribution for perfect baking and roasting results. The oven cavity boasts a generous capacity, allowing users to prepare large meals for family gatherings or dinner parties with ease. The grill function is another impressive addition, permitting quick and efficient grilling of meats and vegetables.

The ZCM 620 X is designed with convenience in mind. It features four gas burners on the hob, which offer precise temperature control and allow for efficient cooking. The hob includes different burner sizes, making it versatile enough for various cooking techniques, from simmering sauces to rapid boiling. The enamel-coated cast iron support ensures that pots and pans are stable during cooking, enhancing safety and efficiency.

In terms of technology, the Zanussi ZCM 620 X is equipped with a thermocouple safety system that automatically cuts off gas supply if the flame goes out, providing peace of mind during operation. The easy-to-use push-button ignition on the burners simplifies the lighting process, making it accessible for all users.

Cleaning is made easier with the ZCM 620 X, thanks to its enamel oven interior and removable inner glass door. These features help minimize grime buildup, allowing for quick wipe-downs after cooking. The oven also comes with multiple shelf positions, accommodating various dishes and ensuring optimal cooking results.

Overall, the Zanussi ZCM 620 X combines traditional cooking methods with modern safety features, providing a reliable and stylish cooking solution. Its combination of a capacious oven, versatile hob, and user-centric designs makes it suitable for both novice cooks and culinary enthusiasts alike. For anyone seeking a comprehensive and dependable cooking appliance, the ZCM 620 X stands out as a top choice in the freestanding cooker market.
Top Page Image Contents