CLEANING THE OVEN
Before cleaning always allow the cooling fan to cool the oven down before switching off at the electricity supply
Cleaning materials
Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives should also be avoided.
Glass Panel
This should be cleaned with a soft cloth soaked in warm soapy water. Do not use abrasive scourers or steel wool.
Oven Shelves and shelf supports
To clean the oven shelves, and shelf supports soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.
The shelf supports can be removed for easy cleaning (see Fig. 8). Please ensure the retaining nuts are secure when refitting the shelf supports.
1
2
FO 0435 | Fig. 8 |
|
Oven Cavity
The enamelled oven cavity is best cleaned whilst the oven is still warm. It is advisable to wipe the oven over with a soft cloth soaked in warm soapy water after each use. However, from time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
Replacing Components
Prior to undertaking any maintenance work or replacing the oven light, be sure to disconnect appliance from the electricity supply.
Replacing The Oven Light
Push in and turn the glass lid anticlockwise (Fig. 9). Remove the faulty bulb and replace with one which is heat resistant to 300°C.
FO 0287 | Fig. 9 |
Electric bulb: 15W, 220-240 V, 50 Hz, 300°C, E14.
These bulbs are available from your local Zanussi Service Centre whose address can be found in tho Zanussi Customer Care Booklet.
17