Desa CGESBM operation manual Cleaning Front Panel Glass, Storage, Replacing Flame Generation Bulbs

Page 6

CLEANING AND

MAINTENANCE

Continued

Replacing Flame Generation Bulbs

1.Remove the 6 screws from back of stove shown in Figure 7. Remove back plate.

2.Locate the flame generation cylindrical drum. It is constructed of two removable halves; ei- ther of which can be removed from the unit.

3.Squeeze half of drum cylinder until it's top edge clears the top drum track. Remove bot- tom edge of cylinder drum from bottom drum track. This will give you access to the light bulbs. Note: Do not exert excessive pressure on drum cylinder as this may cause damage.

4.Remove spring clip. Hold socket and pull out old bulb.

5.Hold socket and push in new bulb (DO NOT exceed wattage). Replace spring clip.

6.Repeat steps 4 and 5 for second bulb.

7.Insert bottom edge of removed cylinder half into bottom drum track. Gently squeeze drum cylin- der until it's top edge fits into top drum rack.

8.Secure the rear cover of the unit to the main frame by reattaching screws removed in step 1.

9.Replace the log set ember bed.

10.Replace the grate to secure the log set.

11.Carefully replace front panel by sliding it downward until the clips reconnect.

12.Replace the grill to front of unit using screws removed earlier.

Screws

Back

Plate

Figure 7 - Locating Flame Generation

Cylinder

Flame Cylinder

Drum (Half)

Bulbs with

Spring Clips

Back of Unit

Figure 8 - Flame Generation Cylinder

Drum Bulb Replacement

CLEANING FRONT PANEL GLASS

WARNING: When cleaning unit, the power supply should be disconnected and the unit should be cool.

Over time the front glass panel may become dirty or dusty. Dust can be removed by lightly rubbing the glass surface with a clean, lint free cloth or paper towel. To remove fingerprints or other marks, use a damp cloth with a good quality household glass cleaner. The front glass panel should be completely dried with a clean, lint free cloth or paper towel.

CAUTION: Do not use abra- sive cleaners on glass panel. Do not spray liquids directly onto any surface of the unit.

WARNING: An authorized service representative should perform any other servicing.

STORAGE

When not in use, unplug the unit from the power supply and store in dry, dust free location.

6

www.desatech.com

117191-01A

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Cgesbm Electric Stove With Manual Control Table of Contents Safety InformationUnpacking Testing the Unit Product Dimensions SpecificationsListing Approvals Operating Instructions Bulb ReplacementGrounding Instructions Control Panel OperationReplacing Top Contrasting Bulb Cleaning MaintenanceRemoving Front of Unit Replacing Log Set Ember Bed BulbsReplacing Flame Generation Bulbs Cleaning Front Panel GlassStorage Remove spring clip. Hold socket and pull out old bulbTechnical Service Replacement PartsTroubleshooting Warranty Information Keep this WarrantyLimited Warranty Electric Stove

CGESBM specifications

Desa CGESBM (Community-based Green Energy and Smart Building Management) represents a pioneering initiative focused on sustainable living and energy efficiency. Situated at the intersection of technology and environmental stewardship, this community is designed to promote a sustainable lifestyle while leveraging cutting-edge technologies.

One of the main features of Desa CGESBM is its commitment to renewable energy sources. The community harnesses solar power through photovoltaic panels installed on rooftops and communal spaces. This initiative significantly reduces reliance on non-renewable energy, empowering residents to contribute to a cleaner planet. Additionally, wind turbines are employed in select areas, further complementing the energy mix and ensuring a consistent and reliable energy supply.

Smart building technologies are central to Desa CGESBM, enhancing the living experience and optimizing resource management. Integrated smart grids enable residents to monitor their energy consumption in real time, encouraging energy-saving behaviors. Advanced sensors throughout the community track air quality, reducing pollution and promoting health and well-being. Energy-efficient appliances and smart home systems are standard, allowing for personalized adjustments that can lead to reduced energy usage and increased comfort.

Water conservation is also a key characteristic of Desa CGESBM. The community employs rainwater harvesting systems and greywater recycling methods, ensuring that water resources are used judiciously. These initiatives not only support the environment but also decrease utility costs for residents, promoting an economically sustainable way of living.

The design of Desa CGESBM emphasizes green spaces and biodiversity. The community features parks, community gardens, and green rooftops, which not only enhance the aesthetic appeal but also contribute to urban cooling, support local wildlife, and foster a sense of community among residents.

Community engagement is strongly encouraged through programs that promote environmental education and sustainability practices. Workshops on energy conservation, organic gardening, and eco-friendly living provide residents with the knowledge and tools to make a meaningful impact.

In summary, Desa CGESBM is more than just a residential area; it is a model for the future of sustainable living. With its integration of renewable energy, smart technologies, water conservation methods, and a focus on community engagement, it showcases how modern innovations can harmonize with environmental goals, creating a livable and resilient community for generations to come.
Top Page Image Contents