INSTALLATION INSTRUCTIONS
AUTOMATIC OPERATION
Having set the clock up as described above, turn the left hand knob to the 'Cook Time' position and set the right hand knob to show a cooking time of two minutes (0.02).
Turn the left hand knob to the 'End Time' position; the time shown on the display is now the time of day with two minutes added on. Rotate the right hand knob to add two minutes to this time to give a two minute delay.
Turn the left hand knob to the 'Automatic' position to complete the programming sequence, the clock now shows the time of day again with 'Auto' glowing continuously.
Turn the oven thermostat on and two minutes after setting, the oven light should illuminate and the fan should start to run.
Two minutes after the lighting sequence has started the timer should cut off the electricity supply to the oven and the audible signal should sound. The signal is continuous it may be switched off at any time by rotating the left hand knob.
Return timer to manual by rotating the left hand knob to the 'Manual' position.
CHECKING THE MAIN OVEN
1.Ensure the timer is set to manual operation.
2.Turn on the main oven thermostat to the highest setting.
3.Ensure the oven is heating up by checking firstly that the oven neon illuminates.
4.After a short period the heat from the oven element may be felt with the oven door open.
5.Check that the oven lights and oven fan are functioning.
CHECKING THE SECOND OVEN
1.Ensure the timer is set for manual operation and the oven door is closed.
2.Turn on the second oven thermostat to the highest setting.
3.Ensure the oven is heating up by checking firstly that the oven neon illuminates.
4.After a short period the heat from the oven element may be felt with the oven door open.
5.Check that the oven light is functioning.
GENERAL NOTE
Instruct the user on how to use the appliance and its ignition system. Refer the user to the wording on the inside cover which gives advice on the safe operation of the appliance.
36