Wall Fitting

INSTALLATION INSTRUCTIONS

Before assembling the appliance, it is necessary to take off the anti-grease grilles.

To remove the first grille, push it towards the rear of the apparatus by using the finger points so that it is released (fig.3). To take it off completely, rotate it on one side while keeping the other one steady.

If installing the appliance in the ducting mode, connect one of the two discharge outlets to the external ducting and seal the other opening with the cap supplied (fig.4).

If installing the appliance in the filtering mode, both discharge outlets must be blanked off using the caps supplied.

Fix the telescopic part (A) with some adhesive tape (W) so that it cannot slip out (fig. 5).

Fix the lower part to the upper part of the hood by using the screws supplied (fig. 5).

Using the drilling template fit two of the screw anchors supplied to the wall, corresponding to holes B (fig. 6). Insert two of the screws supplied and hook the hood in place using the holes B at the back (fig. 6).

Before fully tightening the screws, mark the position of the two holes C on the wall with a marking pen. Unhook the hood and drill the two holes in the marked positions and insert the screw anchors. Hook the hood back into place and finally secure it with the four screws.

Remove the adhesive tape from the telescopic part and pull it downwards until it touches the hob.

ZHC72X specifications

The Zanussi ZHC72X is a modern and efficient kitchen hood that combines stylish design with impressive functionality. Engineered to enhance your cooking experience while maintaining a clean and fresh environment in the kitchen, this appliance showcases a range of features and technologies that make it a top choice for home chefs.

One of the main features of the Zanussi ZHC72X is its powerful extraction capability. The appliance operates with a maximum extraction rate of 400 m³/h, effectively removing smoke, steam, and unwanted odors produced during cooking. This ensures that your kitchen remains comfortable and pleasant, even during extensive cooking sessions. The ZHC72X offers multiple speed settings, allowing you to adjust the extraction power according to your needs. With a simple touch of a button, you can switch between various fan speeds, ensuring that you're always in control of your kitchen environment.

In terms of design, the Zanussi ZHC72X boasts a sleek and contemporary stainless steel finish, making it a stylish addition to any modern kitchen. Its wall-mounted design saves valuable counter space while providing an unobtrusive yet elegant look. The appliance's design also includes a smooth surface that is easy to clean, ensuring that maintenance is minimal and hassle-free.

Another noteworthy characteristic of the ZHC72X is its use of energy-efficient LED lighting. These lights illuminate your cooking space, allowing for better visibility while preparing meals. LED lights are not only brighter but also consume less energy compared to traditional bulbs, making this hood a more eco-friendly choice.

The Zanussi ZHC72X features a grease filter designed to capture unwanted particles from cooking. This washable filter is easy to remove and can be conveniently cleaned, maintaining optimal performance without the need for frequent replacements. Additionally, the appliance is designed to operate quietly, ensuring that your cooking activities are not accompanied by distracting noise levels.

In conclusion, the Zanussi ZHC72X is an excellent kitchen hood that combines power, efficiency, and sleek aesthetics. With its effective extraction rate, multiple fan speeds, energy-efficient lighting, and easy-to-clean features, it stands out as a practical choice for anyone looking to improve their kitchen environment. Whether you are a casual cook or a culinary enthusiast, the Zanussi ZHC72X is designed to meet your needs while ensuring a pleasant cooking experience.