Zanussi ZHC 950 manual Fitting the Hood Body, Extraction

Page 15

Fitting the Hood Body

Before starting to fix the hood body, tighten the two screws Vr located on the top of the hood body.

Hook the hood body onto the two 4.2x44.4mm screws item 12a.

Fully tighten the screws item 12a.

Using a screw driver and spirit level, adjust the screws item Vr until the hood body is level.

Extraction

The cooker hood is more effective when used in the extraction mode (ducted to the outside).

Venting kits may be purchased through your retailer or DIY store, and must be ducted to an outside vent of Ø125mm (5”) or Ø150mm (6”).

The ducting used must be manufactured from fire retardent material conforming to the relevant British Standard or DIN 4102-B1.

When the cooker hood is ducted to the outside the charcoal filter must be removed.

Recirculation

The cooker hood is supplied specified for use in the recirculation mode, with the charcoal filter fitted.

In the recirculation mode contaminated air is passed through the charcoal filter to be purified and recirculated into the kitchen through the grille outlets on either side of the chimney.

To assemble the recirculation duct, place the recirculation outlet connection item 15 into the support item 7.3.

Insert the extension ducts item 14.1 into either side of the recirculation outlet item 15 ensuring the connections are vertically and horizontally aligned with the outlets in the chimney.

Connect the recirculation oulet item 15 to the outlet on top of the hood body using either a piece of Ø125mm or Ø150mm flexible or rigid pipe.

Rigid pipe is strongly recommended and should be used where possible as this will ensure the best performance while lowering noise.

Vr

12a

14.1

15

ø150

13

Image 15
Contents Cooker Hood ZHC Page For the User Important Safety Information Your Appliance Installing the Cooker HoodElectrical Connection Maintenance and Service Important Safety InformationInstallation Child SafetyYour Appliance Operating InstructionsCooker Hood Controls To Operate RecirculationExtraction Charcoal Filter Maintenance and CleaningExternal Cleaning Metal Grease FiltersPage Cooker hood will not start Symptom SolutionCooker hood has switched off during Something not WorkingThis Guarantee does not cover Guarantee ConditionsInstallation Instructions Technical informationElectrical Requirements Installing the Cooker Hood Installation RequirementsUnpacking Clearance Heights Is determined by the height of the upper chimney supplied Fitting the Wall BracketsFitting the Hood Body Electrical Connection and Working Test DuctingUpper Chimney Fitting the Chimney StackPage Page Electrolux plc 436001681 01

ZHC 950 specifications

The Zanussi ZHC 950 is a sleek and efficient kitchen appliance designed specifically for those who value both functionality and aesthetics in their cooking space. This wall-mounted chimney hood combines advanced technology with modern design to ensure that your kitchen remains fresh and odor-free while making a stylish statement.

One of the main features of the Zanussi ZHC 950 is its powerful extraction rate. With a maximum extraction capacity of up to 600 cubic meters per hour, this hood is well-equipped to handle even the most intense cooking sessions. It effectively removes grease, smoke, and lingering odors, ensuring that your kitchen environment remains clean and pleasant. The appliance features multiple speed settings, allowing you to adjust the airflow to suit your cooking needs, whether you’re boiling pasta or frying fish.

The Zanussi ZHC 950 employs a high-efficiency motor that not only enhances performance but also reduces energy consumption. This technology ensures that the hood operates quietly, making it a perfect choice for open-plan living spaces where noise can be a concern. Additionally, the appliance is designed with easy-to-clean aluminum filters that capture grease and can be washed periodically, ensuring that the hood remains in optimal condition with minimal maintenance.

Another characteristic of the Zanussi ZHC 950 is its modern design. The clean lines and minimalist look make it a striking addition to any kitchen decor. Available in a range of finishes, including stainless steel, it can seamlessly integrate into contemporary, traditional, or industrial-style kitchens. The built-in LED lighting is another thoughtful feature, illuminating your cooking area while adding a touch of elegance.

Installation is straightforward, and the hood is designed to be mounted on the wall above your cooking range for optimal performance. The Zanussi ZHC 950 is also compatible with recirculation kits, allowing it to be used in kitchens where ducting to the outside is not feasible.

In summary, the Zanussi ZHC 950 wall-mounted chimney hood combines powerful extraction capabilities with energy efficiency, a modern aesthetic, and ease of maintenance. It’s an ideal choice for anyone looking to enhance their kitchen environment while ensuring a pleasant cooking experience. With its blend of style and performance, the Zanussi ZHC 950 is sure to impress.