Zanussi ZUD 9154 A manual Fitting the plinth

Page 16

	8	mm
	8	I
		I
	F	K
		K
		G
	13

7. Refit the covering strip (A).

	L
	90°
L	115°
L
15
16

Fitting the plinth

Important

For the efficient operation of the appliance, it is important that the original ventilation grid is used.

•For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an opening height dimension B=870 mm and a plinth height dimension b=150 mm.

•For plinth heights greater than a=100 mm, b=150 mm, a cut should be made in the plinth, 580 mm wide, in the centre of the appliance position, leaving a remaining height of a=100 mm, b=150 mm.

•Attach plinth to the kitchen units.

A = 820	B = 870	100 150
		a = b =
		580
	25	-
	25	80
	25
DO008
Important

The plinth must be positioned at a minimun distance of 25 mm from the door.

Image 16

Contents Refrigerator Important Safety Instructions Contents Setting the temperature OperationBefore use Fresh food refrigerationDoor shelves Health and Safety GuidelinesNormal Operating Sounds Maintenance and Cleaning Internal cleaningPeriodic cleaning DefrostingSymptom Solution When the appliance is not in useSomething not Working? Customer Care Department Service and Spare Parts08705 Guarantee Conditions Standard guarantee conditionsEuropean Guarantee This guarantee does not coverInstallation Technical SpecificationsPositioning Door reversal Green and Yellow Earth Blue- Neutral Brown Live Electrical ConnectionThis appliance complies with the following E.E.C. Directive Installation kit Building-in instructionsGrid preparation Building in the appliance under a worktop Left door openingTo mount the furniture door proceed as shown in the figures Click Fitting the plinth Page Page Page Electrolux plc