Zanussi ZUD 9124 manual BUILDING-IN Instructions, Inner door reversal, Grid preparation

BUILDING-IN INSTRUCTIONS

Before carrying out any work, remove the plug from the power socket.

Inner door reversal

1.Using a screwdriver release bracket (1) by pressing on the internal spring (Fig.) and withdraw it from its seat together with the door;

2.remove plug (2) and fit it in the hole left open on the opposite side;

3.turn the door through 180°, remove the bracket (1) and refit it on the opposite side.

4.Refit the door and insert the top pin and bottom bracket (1), pushing it into place.

To ensure correct storage of food, the door is fitted with a simple spring device which holds it in the open position until it is properly closed.

Grid preparation

Left door opening:

Remove the left side (A) of the grid cutting it from the rear (see figure).

Right door opening:

Remove the right side (B) of the grid cutting it from the rear (see figure).

To position the grid on the appliance proceed as fol- lows:

Apply the grid to the base of the appliance by pushing on to the clasps (a) until they click.

180°

2

1

PR140

A

B

DO002/2

a

a

DO001

17