Door reversibility
1.Unplug the appliance from the power supply before carrying out the
2.Remove the ventilation grill (D).
3.Unscrew the bottom hinge (E).
4.Remove the fridge door by releasing it from the middle hinge (H).
5.Unscrew the middle hinge.
6.Remove the freezer door by releasing it from the top hinge pin (A).
7.Remove the pin (A) then mount this on the opposite side, after having removed the plugs which must be refitted on the other side.
8.Refit the freezer door.
9.Replace the middle hinge to the left hand side. 10.Replace the fridge door.
11.Screw down the bottom hinge (E) on the opposite side by using the screws previously removed.
12.Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side.
14.On the side where the handle is to be fitted, push in the blanking cover caps to free the new holes. Remove the handles and refit them on the opposite side. Cover the holes left open with the plugs contained in the documentation pack.
The doors can be aligned by adjusting the middle hinge.
The middle hinge can be adjusted horizontally, with the help of a tool, after having slackened the two screws.
Important
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer on a low setting.
E | F |
| |
F |
|
| F |
D |
|
F |
|
H |
A |
D736 |
D737 |
19