Zanussi ZECB 300 W manual Something Not Working, Problem Possible Cause Solution

Problem

Possible Cause

Solution

No power to the appliance

No power at the socket.

Check there is power at the socket.

There is a power cut.

Check there is not a power cut by checking the

household lights.

The fuse has blown.

Check the fuse has not blown.

Thermostat control knob is set at „0”.

Check the thermostat setting.

The temperature in the

The appliance is located in an unsuitable position.

Check the ambient temperature is within the

fridge or freezer is too high

The thermostat control knob is set too low.

appliances operating limits of 10 °C to 32 °C.

Check that the thermostat control knob is turned to

the correct setting relative to ambient conditions.

The compressor runs

The thermostat control knob is set at the wrong

Adjust the thermostat control knob.

continuously

temperature.

The door is open.

Close the door.

Large quantities of food have been placed in the

cabinet.

The door has been opened too frequently.

Do not leave the door open longer than necessary.

The air ventilation is obstructed.

Check that the air ventilation is not obstructed.

The temperature in the

The thermostat control knob is set too cold.

Set the thermostat control knob to a warmer

fridge or freezer is too low

position.

Excessive frost and ice has

The door has been left open.

Check the door has not been left open.

built up

Something is obstructing the door.

Check nothing is preventing the door from closing.

The door gasket is dirty.

Check the door gasket is intact and clean.

The appliance is noisy.

The appliance is not level.

Check if the appliance stands stable on the floor.