Zanussi ZT 56 RL manual Electrical Connection, Green and Yellow Earth Blue Neutral Brown Live

Page 14

ELECTRICAL CONNECTION

WARNING:

THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13amp socket in another part of your home.

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance, may not correspond with the markings identifying the terminals in your plug, proceed as follows:

Connect the Green and the Yellow (earth) wire to the terminal in the plug which is marked with the letter

«E» or the earth symbol , or coloured green and yellow.

Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter «N» or coloured

This appliance complies with the E.E.C. Directive No. 87/308 of 2.6.87 relative to radio interference suppression.

This appliance complies with the following E.E.C. Directive:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent amendments.

-89/336 EEC of 3.5.89 (Electromagnetic

-Compatibility Directive) and subsequent amend- ments.

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of breakdown.

GREEN & YELLOW

13 AMP. FUSE

13 AMP

BROWN

BLUE

black.

Connect the brown (live) wire to the terminal in the plug which is marked with the letter «L» or coloured red.

The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BS1362 fuse. Only ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Zanussi Service Force Centre whose address is listed in the Customer Care Booklet which accompanies your instruction manual.

D207

CORD CLAMP

14

Image 14
Contents Refrigerator Contents Important Safety Instructions Description of the Appliance Before use Setting the temperatureOperation Fresh food refrigerationHealth and Safety Guidelines Defrosting When the appliance is not in use Maintenance and CleaningInternal cleaning External cleaningSymptom Solution No power to appliance Something not WORKING?08705 Service and Spare PartsCustomer Care Department European Guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsPositioning Technical SpecificationsInstallation Door Reversal Electrical Connection Green and Yellow Earth Blue Neutral Brown Live