Texas Instruments TPA2008D2 manual EVM Warnings and Restrictions

Page 4

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the supply voltage range specified in the user’s guide. The supply voltage range should be 4.5 V to 5.5 V.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than 85° C. The EVM is designed to operate properly with certain components above 85° C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User’s Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Copyright 2003, Texas Instruments Incorporated

Image 4
Contents User’s Guide Important Notice EVM Important Notice EVM Warnings and Restrictions Preface Information About Cautions and WarningsRelated Documentation From Texas Instruments Contents Figures TablesIntroduction Feature Highlights Description TPA2008D2 EVM Specifications To 5.5Operation EVM JP4 JP5 JP6 JP7 JP8Precautions Supply PowerQuick Start List for Platform Platform preparationsQuick Start List for Stand-Alone Evaluation Module PreparationsQuick Start for Stand-Alone Operation Power Requirements Operation Reference TPA2008D2 EVM Schematic TPA2008D2 Filter-Free Class-D EVM Schematic DiagramTPA2008D2 EVM Top Assembly TPA2008D2 EVM PCB LayersTPA2008D2 EVM Parts List TPA2008D2 EVM Parts ListDC Volume Table DC Volume ControlReference

TPA2008D2 specifications

The Texas Instruments TPA2008D2 is a highly efficient, integrated audio amplifier designed to meet the demands of a variety of audio applications. This device is particularly well-suited for portable electronic devices, such as smartphones, tablets, and portable speakers, where space and power efficiency are critical considerations.

One of the standout features of the TPA2008D2 is its Class-D architecture, which allows for greater efficiency compared to traditional Class-AB amplifiers. With a maximum output power of up to 3.2 W per channel when operating from a 5 V power supply, it delivers high-quality audio performance while minimizing heat generation. This efficiency is crucial for battery-operated devices, as it prolongs battery life while providing ample power for driving speakers.

The TPA2008D2 also boasts a low quiescent current, which further enhances its power efficiency. The device operates with a wide supply voltage range, from 2.5 V to 5.5 V, making it highly versatile for various applications. Its small size and low profile package make it easy to integrate into compact designs, allowing manufacturers to create sleek products without compromising on audio quality.

In addition to its impressive power efficiency, the TPA2008D2 features built-in protections, including over-temperature protection and short-circuit protection. These safety features provide reliability and longevity, ensuring that the device can withstand varying operating conditions without failure.

Another notable technology employed in the TPA2008D2 is its advanced feedback mechanism, which ensures optimal performance across various loads and helps maintain audio clarity and fidelity. The amplifier supports a variety of input types, providing flexibility for design engineers when integrating it into different systems.

The design of the TPA2008D2 includes differential inputs, which help to eliminate noise and improve the overall sound quality. The inclusion of a gain setting allows users to customize the amplifier to suit specific application requirements, making it an adaptable solution for designers.

In summary, the Texas Instruments TPA2008D2 is a feature-rich audio amplifier that combines power efficiency, compact size, and reliability, making it a perfect choice for portable audio applications. With its Class-D design, advanced protection features, and flexibility in input and gain options, it continues to be a favored solution among audio designers seeking high performance in a small package.