Zanussi ZERC 3025 X manual Changing the light bulb, Defrosting

Page 7

Changing the light bulb

If it becomes necessary to replace the lamp, press on the rear hook and at the same time slide the cover in the direction indicated by the arrow.

Unscrew the bulb and replace it with one of the same power (the maximum power is shown on the light diffuser).available from your nearest Service Force Centre.

Replace the light cover by sliding it into its original position.

Defrosting

The refrigerator automatically defrosts every time the compressor stops. The water is discharged, via the pipe, into a tray located at the back of the appliance above the compressor, where it evaporates.

Important

To avoid defrost water overflowing into the fridge, periodically clean the water discharge hole in the centre of the V shaped drip collector at the back of the refrigerator compartment behind the salad crispers. Use the defrost cleaner provided which you will find already inserted into the discharge hole.

Remember to wash the defrost cleaner in hot soapy water at regular intervals. Dry throughly before replacing.

D037

7

Image 7
Contents Refrigerator Installation Important Safety InformationContents Operation Movable shelves Normal Operating SoundsPositioning the door shelves Hints and Tips Maintenance and CleaningDefrosting Changing the light bulbSomething not Working Symptom SolutionCustomer Care Department Service and Spare PartsThis guarantee does not cover Guarantee ConditionsStandard guarantee conditions European GuaranteeNET Capacity Technical SpecificationsPositioning InstallationRear spacers Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsDoor reversal directions Electrolux plc