Zanussi ZERB 2420 manual Freezer

Page 9

Freezer

When the frost has reached a thickness of up to 4mm it can be removed using the ice scraper provided with the appliance. During this operation it is not necessary to disconnect the appliance from the mains and remove the food. Never use metal tools for this operation.

For complete defrosting (once or twice a year) proceed as follows:

-turn the thermostat dial to the «OFF» position (O) or disconnect the appliance from the mains.

-Remove any food from inside the freezer and fridge, wrap it in several sheets of newspaper and store in a cool,dry place.

-Leave the door open and insert the ice scraper under the channel in the centre of the lower part of the appliance; place a low-sided container beneath the scraper to collect the water (see fig.).

D068

-Clean and dry thoroughly.

-Replace the scraper in one of the drawers .

-Reconnect the appliance to the mains or reset the thermostat to a functioning position.

-After letting the appliance run for at least half an hour, replace the previously removed food into the compartment.

Important

When defrosting the freezer, the fridge is also controlled by the thermostat and will not be operational during this period. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.

9

Image 9
Contents Refrigerator Freezer Installation Important Safety InformationContents Operation Thawing Making ice cubesFresh food refrigeration Positioning the door shelves Movable shelvesEvent of a Power Failure Energy Saving AdviceHints and Tips Normal Operating SoundsMaintenance and Cleaning Freezer Symptom Solution Low room temperature operationSomething not Working Service and Spare Parts Customer Care Department9 9 2 Standard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsNET Capacity Technical SpecificationsInstallation PositioningRear spacers Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsDoor reversal Page Page Page Electrolux plc