Instructions for the Installer

Technical Specifications

Model	ZER 240 W
Gross capacity (l)	Frozen food comp.: 18
	Fresh food com.:	219
Net capacity (l)	Frozen food comp.: 18
	Fresh food com.:	213

Width (mm)	550
Height (mm)	1250

Depth (mm)	600
Energy consumption (kWh/day)	0,98
(kWh/year)	358
Energy class, according to EU Standards	B
Star rating of frozen food compartment	****
Rated power (W)	100
Weight (kg)	47

Installing the appliance

Transportation, unpacking

The appliance and the interior fitting are protected for transport.

Remove all packaging and any adhesive tape.

Any remnants of adhesive can be removed using white spirit.

After transportation the appliance must not be switched on for 2 hours. This is to allow the refrigerant to settle.

Cleaning

Clean the accessories and the inside of the appliance with warm water and bicarbonate of soda (5 ml to 0.5 litres of water). Rinse and try thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol.

Location

The appliance should be positioned in a well ventilated, dry room.

Energy use is affected by the ambient temperature. The appliance should therefore:

not be installed next to radiators, cookers or other sources of heat

only be installed at a location where the ambient temperature corresponds to the climate classification, for which the appliance is designed.

The climate classification can be found on the serial plate.

The following table shows which ambient temperature is correct for each climate classification:

Climate Classification Ambient Temperature

SN	+10 to +32 °C
N	+16 to +32 °C
ST	+18 to +38 °C