1.Remove the plug from the power socket.
2.Tilt back the appliance carefully so that the com- pressor cannot touch the floor.
3.Unscrew both adjustable feet.
4.Unscrew the screws of the door bottom hinge.
1)If foreseen
5.Take off the appliance door by pulling it slightly downwards.
6.Unscrew the top door hinge pin of the appliance then screw it back on the other side.
7.Fit the appliance door on the upper door hinge pin.
8.Remove the lower hinge. Put over the pin in the di- rection of the arrow.
9.Unscrew and install the screw on the opposite side.
10.Install the lower hinge on the opposite side leav- ing the position of the door unchanged.
11.Screw in the one screw in the place set free on the other side as well as the ad- justable feet (2 pieces).
12.Remove and install the handle1) on the opposite side.
13.Reposition, level the appliance, wait for at least four hours and then con- nect it to the power socket.
Do a final check to make sure that:
•All screws are tightened.
•The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the rever- sibility of the doors at your cost.
7