Electrical Connection
Any electrical work required to install this appliance must be carried out by a qualified electrican or competent person.
This appliance must be earthed.
The manufacturer declines any liability should these safety measure not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any reason. The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow | : Earth |
Blue | : Neutral |
Brown | : Live |
The wire coloured green and yellow must be connected to the terminal marked with the letter “E”
or by the earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the terminal marked ‘N’ or coloured black.
The wire coloured brown must be connected to the terminal marked “L” or coloured red.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
Important
If the mains supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.
18