Before using, Door reversal directions Fig

Important

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow	- Earth
Blue	- Neutral
Brown	- Live

If you ﬁt your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug, proceed as follows:

Before using

Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell might linger. Dry thoroughly.

Door reversal directions (Fig. 5)

Before carrying out the operations described below, pull out the mains plug from the wall socket.

To carry out this reversal go through the following

GREEN & YELLOW

Fig. 4

13 AMP. FUSE

steps:

Gently lay the fridge/freezer on its back with the top held away from the ﬂoor by 5-8 cm (2-3 inches)

13 AMP

BROWN

BLUE

of packing;

Remove the plastic cover (6) (which has a clip-in ﬁtting) masking the bottom hinge;

Remove bottom hinge (1);

Slide out the lower door from middle hinge (2) and remove the latter;

Slide out the upper door from pin (3); Reﬁt pin (3) on the opposite side;

D207

CORD CLAMP

Reﬁt the upper door and the middle hinge on the opposite side;

Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol , or coloured green and yellow.

Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter «N» or coloured black.

Connect the brown (live) wire to the terminal in the plug which is marked with the letter «L» or coloured red.

The plug moulded onto the lead incorporates a fuse. For replacement, use a 13amp BSI362 fuse. Only ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Zanussi Service Force Centre whose address is listed in the Customer Care Booklet which accompanies your instruction manual.

This appliance complies with the E.E.C. Directive No. 87/308 of 2.6.87 relative to radio interference suppression.

This appliance complies with the following E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modiﬁcations;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modiﬁcations.

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

Reﬁt the lower door and bottom hinge (1) on the opposite side;

Blank off all unused holes with plugs (7). Reﬁt the plastic cover (6) on the bottom hinge. Remove handles (4-5) and reﬁt them on the opposite side.

		Fig. 5
		3
	5	2
	5
	4	1
		1
D074	7	6
D074		6

Warning:

After having reversed the opening direction of the doors, check that all the screws are properly tightened.

ZFCA 62/26 specifications

The Zanussi ZFCA 62/26 is a standout appliance in the world of refrigeration, providing an exceptional combination of practicality, efficiency, and modern design. With its sleek appearance and user-friendly features, this refrigerator-freezer duo is designed to meet the needs of contemporary kitchens while ensuring optimal food storage.

One of the notable features of the ZFCA 62/26 is its impressive capacity. Boasting a spacious 263 liters total volume, it offers ample storage space for families and individuals alike. The refrigerator compartment, designed for easy organization, comes with adjustable shelves made of durable glass, allowing users to customize storage as needed. The shelves can accommodate larger items such as tall bottles and bulky food items with ease.

The ZFCA 62/26 also incorporates innovative cooling technology. The frost-free freezer ensures that users will never need to deal with the hassle of manual defrosting. The no-frost system maintains optimal air circulation, preventing frost buildup and helping to keep food fresher for longer periods. This feature saves time and effort, allowing users to focus on meal prep rather than appliance maintenance.

Energy efficiency is a key priority for Zanussi, and the ZFCA 62/26 reflects this commitment with an excellent energy rating. Operating quietly and efficiently, it contributes to lower electricity bills while being environmentally friendly. The appliance’s smart design includes LED lighting, which illuminates the interior of the fridge while consuming minimal energy.

In terms of user convenience, the ZFCA 62/26 is equipped with a reversible door. This allows for installation flexibility, enabling users to choose whether the door swings left or right based on kitchen layout. Additionally, the intuitive control system makes it easy to regulate temperatures in both the fridge and freezer compartments.

Lastly, the Zanussi ZFCA 62/26 emphasizes durability and design. It is built with high-quality materials that withstand daily use. The modern finish adds a touch of elegance, making it an attractive addition to any kitchen decor.

In summary, the Zanussi ZFCA 62/26 combines ample storage capacity, advanced cooling technologies, energy efficiency, and thoughtful design features, making it an ideal choice for anyone seeking a reliable and stylish refrigeration solution.