Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or these warnings contact the Customer Care Department.

Prior to installation

Check the appliance for transport damage. Under no circumstances should a damaged appliance be installed. In the event of damage please contact your retailer.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

Ensure that the appliance does not stand on the electrical supply cable. If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.

Make sure that the power plug has not been squashed or damaged during transit.

-A damaged power plug may overheat and cause a fire.

As you unpack the appliance, check carefully for any signs of transit damage.

Do not place heavy articles or the fridge/freezer itself on the power cord.

-There is a risk of a short circuit and fire.

Do not remove the power cord by pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche.

-Damage to the cord may cause a short-circuit, fire and/or electric shock.

-If the power cord is damaged, it must be replaced by a

certified service agent or qualified service personnel.

If the power plug socket is loose, do not insert the power plug.

- There is a risk of electric shock or fire.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.

The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.

Child Safety

Do not allow children to tamper with the controls or play with the product.

Keep packaging materials away from children to prevent the risk of suffocation!

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Safety precautions for isobutane

Warning

The refrigerant isobutane (R 600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance.

During Use

This appliance is designed for domestic use only, specifically for the storage of edible foodstuffs. It is not intended for commercial or industrial use.

Containers with flammable gases or liquids can leak at low temperatures. Do not store any containers with flammable materials, such as spray cans, fire extinguisher refill cartridges etc. in the appliance.

Frozen food should not be refrozen once it has thawed out.

Do not place carbonated or fizzy drinks in the freezer compartment.

Ice lollies can cause 'frost/freezer burns' if consumed straight from the freezer.

Do not remove items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.

Bottles and cans must not be placed in the freezer compartment they can burst when the contents freeze.

Manufacturers' recommended storage times should be adhered to. Refer to relevant instructions.

Maintenance and Cleaning

Before cleaning, always switch off the appliance and disconnect from the electrical supply.

When unplugging always pull the plug from the mains socket, do not pull on the cable.

Servicing

This product should be serviced by an authorised engineer and only genuine spare parts should be used.

Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre.

At the end of the Appliance Life

When disposing of your appliance use an authorised disposal site.

Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.

The Appliance and the Environment

This appliance does not contain gases which could damage the ozone layer.

Avoid damaging the cooling unit.

The packaging used on this appliance marked with the symbol is recyclable.

Keep this instruction book for future reference and ensure it is passed on to any new owner.

ZNB 323 S, ZNB 323 W specifications

The Zanussi ZNB 323 W and Zanussi ZNB 323 S are modern, efficient refrigerators that combine functional design with advanced cooling technologies, catering to the needs of contemporary households. Both models are part of Zanussi's commitment to delivering high-quality appliances that enhance daily living.

One of the key features of these refrigerators is their spacious interior. Both models provide ample storage space, designed with adjustable shelves to accommodate groceries of all sizes. The smart layout ensures that users can easily organize and access their food items, minimizing the time spent searching for essentials. With separate compartments for fruits and vegetables, these refrigerators help maintain optimal humidity levels, keeping perishables fresh for longer.

The Zanussi ZNB 323 models are equipped with advanced cooling technologies that enhance energy efficiency while ensuring uniform temperature distribution throughout the refrigerator. This means that foods stay fresher for longer, reducing waste and promoting healthier eating habits. The No Frost feature is a standout characteristic, preventing ice buildup and maintaining an even temperature. This not only saves users from the hassle of manual defrosting but also ensures that food items are stored under stable conditions.

Another significant advantage of the ZNB 323 W and ZNB 323 S is their energy efficiency. Both models are designed to consume less electricity, which not only helps reduce utility bills but also aligns with environmentally conscious living. With a high energy rating, these models reflect Zanussi's commitment to sustainability and reducing carbon footprints.

The two models differ in external finishes; the ZNB 323 W features a classic white design, while the ZNB 323 S comes with a sleek stainless steel finish. This variety allows customers to choose a refrigerator that suits their kitchen decor, enhancing the overall aesthetic of their culinary space.

Both refrigerators are designed for easy usability, with intuitive controls that simplify temperature adjustments. Additionally, they come with integrated LED lighting that illuminates the interior efficiently, allowing users to locate items with ease, even in low light.

Overall, the Zanussi ZNB 323 W and ZNB 323 S are excellent choices for anyone seeking a reliable, efficient, and stylish refrigerator. With a blend of innovative features, energy-efficient performance, and user-friendly designs, these models offer a modern solution to food storage needs in today's fast-paced world.