2 Interfacing |
To connect to a balanced (XLR) input, use a | 2.7 Connecting |
standard XLR cable. | Cables |
To connect to an unbalanced input (mono jack), use a cable with a female XLR connector and TS jack plug (see fig. 1 below):
1.On the XLR connector, use a wire bridge to connect pin 1 to pin 3 and the cable shield.
2.Connect the inside wire of the cable to pin 2 on the XLR connector and the tip contact of the jack plug.
Fig. 1: Connecting cable for unbalanced micro- phone inputs.
15