Faber Diamante For Ductless Installations, For ALL Installations, Fit the Left and Right

Page 8

1.LOWER CHIMNEY DUCTLESS

2.LEFT VENT GRID

3.RIGHT VENT GRID

4.DIVERTER EXTENSION HORIZONTAL (2 PIECES)

5.DUCTLESS DIVERTER

6.CHARCOAL FILTER

FIGURE 8

FOR DUCTLESS INSTALLATIONS

Ductless installations require a Ductless Conversion Kit whose components are pictured in FIGURE 8. Do not use the DAMPER (H in FIGURE 1) for ductless installations. The LOWER CHIMNEY COVER (B in FIGURE 1) should be discarded and replaced by a new one with holes (1 in FIGURE 8).

1.As indicated in FIGURE 8, fit the DUCTLESS DIVERTER

(5) over the duct outlet. Fit the 2 DIVERTER EXTENSION HORIZONTAL pieces (4) on either side of the DUCTLESS DIVERTER.

2. Install the CHARCOALFILTER (6) behind the center grease filter opening by inserting and locking into place, as indicated in FIGURE 9.

FIGURE 9

FOR ALL INSTALLATIONS

1.Remove the cover from the Field Wiring Compartment with a phil- lips screwdriver. Feed the Power Supply Cable through the electrical knockout. Connect the Power Supply Cable to the rangehood cable. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist- on type wire connector. Attach the Power Supply Cable grounding lead to the green screw provided. Using the 4 holes provided screw the Field Wiring Compartment to the wall as dictated by your Power Supply Cable location (screws not provided). Replace the cover.

2.Install the UPPER CHIMNEYCOVER (CinFIGURE10)by slightly widening the two sides and hooking them behind the CHIMNEY MOUNTING BRACKETS (E). Secure the sides to the CHIMNEY MOUNTING BRACKETS with the 4 CHIMNEY SCREWS (G).

3.Install the LOWER CHIMNEY COVER (B) by slightly widening the two sides of the LOWER CHIMNEY COVER and hooking them between the UPPER CHIMNEY COVER and the wall making sure that it fits snugly. Secure the LOWER CHIMNEY COVER to the CANOPY SECTION (A) with 2 CHIMNEY SCREWS (G).

FIGURE 10

FOR DUCTLESS

 

INSTALLATIONS

 

Fit the LEFT AND RIGHT

 

VENT GRIDS (2 and 3)

 

into the LOWER CHIMNEY

 

DUCTLESS holes, making

 

sure that the directional

 

symbols are towards the top

 

andfrontofthehoodandthat

 

they connect snugly to the

 

DIVERTER EXTENSION

FIGURE 11

HORIZONTAL pieces.

 

Version 12/04 - Page 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Lisez Bien Cette Fiche Avant Dinstaller LA Hotte DiamanteVenting Requirements Electrical RequirementsFor residential use only Ducted fans must always be vented to the outdoorsUniquement pour usage menager Règlements DévacuationFiche Technique Électrique Feet Plan the InstallationHardware Package Literature Package Vented to the outside 8 min UpperCanopy Cabinet baseDuctless Installation Dimensions Not vented to the outsidePrepare the Wall Install the RangehoodProceed to for ALL Installations on Next For Ductless Installations For ALL InstallationsAs indicated in , fit the Ductless Diverter Fit the Left and RightWarranty & Service USE and Care Information

Diamante specifications

Faber Diamante is a standout product in the realm of premium kitchen ventilation solutions, combining advanced technology with exquisite design. This range hood is renowned for its powerful performance and aesthetic appeal, making it a perfect addition to modern kitchens.

At the heart of the Faber Diamante is its innovative suction technology. The hood features a high-efficiency blower system that ensures optimal air extraction. With a high extraction rate, it effectively removes smoke, steam, and odors, keeping the kitchen fresh and pleasant. The powerful fan operates quietly, ensuring that cooking is not interrupted by unnecessary noise, creating a serene culinary environment.

One of the significant features of the Faber Diamante is its sleek, minimalist design. It is available in various finishes, including stainless steel and glass, allowing it to complement various kitchen styles. The low-profile design adds sophistication without overwhelming the kitchen space, enhancing its overall aesthetic.

A standout characteristic of the Faber Diamante is its user-friendly control system. The hood is equipped with push-button controls or modern touch controls, enabling users to easily operate the fan speed and lighting arrangements. This intuitive interface is designed for convenience, allowing for quick adjustments while cooking.

In terms of lighting, the Faber Diamante incorporates integrated LED lights, which provide excellent illumination over the cooking surface. The energy-efficient lighting not only enhances visibility but also contributes to a contemporary aesthetic, making cooking more enjoyable.

Maintenance is also a priority with the Faber Diamante. The hood features easy-to-clean, removable filters that ensure longevity and performance. These filters capture grease and impurities effectively and can be washed in a dishwasher, making upkeep a breeze.

The Faber Diamante embodies a commitment to sustainability with energy-efficient components that adhere to modern environmental standards. This focus on energy conservation allows homeowners to enjoy high-performance ventilation without a significant energy bill.

Overall, the Faber Diamante is a fusion of functionality and style. Its powerful performance, quiet operation, sleek design, intuitive controls, and easy maintenance make it an ideal choice for homeowners seeking a premium kitchen ventilation solution that doesn't compromise on aesthetics or efficiency. Whether you're a passionate home cook or an occasional chef, the Faber Diamante is engineered to elevate your cooking experience.
Top Page Image Contents