Specifications, Save This Manual | Harbor Freight Tools 92960

Specifications

Maximum Operating Pressure	750 PSI
Flow Rate (Maximum)	9.2 Gallons per Minute
Working Temperature	14o to 120o F.
Fluid Inlet	1/2” - 14 NPT
Viscosity	8 - 5000 mPas (MilliPascal sec.)
Fluid Range	1-35 LPM / .3 - 9.2 GPM
Weight	1.70 Lbs.

NOT FOR COMMERCIAL USE

Note: A separate oil pump (not included) is required for use with this Oil Gun. This separate oil pump must supply less than 750 PSI. This pump must be designed for continuous use with the ability to withstand a stoppage of oil flow when the Oil Gun Handle is released.

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not work with flammable gasses or liquids near heat sources of any kind. Do not operate power tools in close proximity to the Oil Gun.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle the Oil Gun.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.

6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Wear heavy work gloves during operation.

7.Use eye protection. Always wear ANSI approved impact safety goggles. Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.

8.Do not overreach. Keep proper footing and balance at all times.

SKU 92960

For technical questions, please call 1-800-444-3353

Page 2

92960 specifications

Harbor Freight Tools has long been recognized as a go-to source for high-quality, affordable tools, and one of the standout products in their lineup is the Harbor Freight Tools 92960. This versatile tool is a powerful and reliable option for both amateur and professional users alike, designed with a range of features that enhance its usability and efficiency.

One of the key features of the Harbor Freight Tools 92960 is its robust build quality. Constructed from durable materials, this tool is designed to withstand rigorous use while retaining its functionality over time. The ergonomic design ensures a comfortable grip, reducing fatigue during prolonged use. This is particularly important for users who rely on this tool for extended periods.

Incorporating advanced technologies, the 92960 boasts an innovative motor that delivers superior performance. The high torque output enables this tool to tackle a variety of tasks, from mechanical work to hobby projects. Users appreciate the efficient power-to-weight ratio, which provides effective results without unnecessary strain on the operator. The quick-release mechanisms are another highlight, allowing for rapid bit changes to enhance workflow, saving time and increasing productivity.

The Harbor Freight Tools 92960 is also equipped with adjustable settings, offering versatility for different applications. Whether a user is tightening, loosening, or drilling, the customization options allow for optimal control and precision. This feature makes it suitable for both light-duty tasks and heavier-duty jobs, making it a versatile addition to any toolkit.

Safety is a paramount concern, and the 92960 incorporates protective features that ensure safe operation. The built-in safety lock prevents accidental activation, which is crucial in preventing mishaps. Additionally, the tool is designed with heat dissipation features that help maintain an optimal operating temperature, further promoting user safety.

Finally, the affordability of the Harbor Freight Tools 92960 sets it apart from competitors. With its competitive price point, users can access high-performance tools without breaking the bank. This makes it an excellent investment for hobbyists and professionals who seek reliability and quality without compromising their budget.

Overall, the Harbor Freight Tools 92960 is a standout product characterized by its durable construction, advanced motor technology, adjustable settings, and user-friendly safety features. It is an invaluable tool that meets the demands of various users, making it a top choice in the realm of affordable, high-quality tools.