Unpacking

Note: Performance of this product may vary depending on variations in local line voltage or tool battery power. Extension cord usage may also affect product performance.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

When unpacking, check to make sure the parts listed on page 7 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

Caution: To avoid health hazards: Clean all un-assembled parts in the dishwasher. Never wash the Grinder Drive Unit (1) in the dishwasher. Before assembling, thorougly wipe off the Meat Grinder Drive Unit (1) parts with a damp rag and antibacterial soap, making sure to keep moisture away from the motor housing and power cord. After assembly, test the Meat Grinder by running several slices of day old bread through the machine to insure that all parts are working properly. After each use, clean the Meat Grinder thoroughly. Do not submerge the electrical machinery in the water. Detach parts and wash in mild antibacterial detergent and warm water. Dry parts and re-assemble when ready to use.

FIGURE 1

Sausage Stuffer (14) attached to unit - held in by threaded Nut (12).

FIGURE 2

Sausage Maker (14)

Spiral Drive (7)

Sausage Maker (15)

	Cutting Edge
Fine Grill (10)	Star Cutter (8)
Course Grill (11) - not shown

SKU 90262

Page 4

REV 05/04 REV 03/05