Extension Cords

2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.)

3.Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.)

Figure A

Figure B

Double Insulated Tools with Two Prong Plugs

4.This appliance has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.”

5.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B above.)

6.Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B above.)

1.Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.

2.As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Table A.)

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Table A.)

SKU 94559

For technical questions, please call 1-800-444-3353

Page 6

94559 specifications

Harbor Freight Tools is well-known for offering a variety of high-quality tools at affordable prices, catering to both professional tradespeople and DIY enthusiasts. One of their standout products is the Harbor Freight Tools 94559, an exceptional offering that has garnered attention for its efficient design and robust performance.

The Harbor Freight Tools 94559 is an electric winch that boasts a powerful 1,500-pound pulling capacity, making it ideal for a range of applications. Whether you're hoisting heavy loads, pulling vehicles out of mud, or lifting equipment at a job site, this winch provides the strength and reliability required for demanding tasks. Additionally, its compact size allows for easy installation in various settings, ensuring you can deploy it wherever needed without hassle.

One of the standout features of the 94559 is its high-speed motor, which delivers a quick, efficient lift. The winch operates seamlessly with a wireless remote control, allowing for safe operation from a distance. This remote adds an important layer of convenience, as users can monitor the lifting process without being in close proximity to the load.

Safety is a paramount concern in any lifting operation, and the Harbor Freight 94559 addresses this with its built-in braking system. This system ensures that loads are securely held in place when not in motion, preventing accidental drops or slippages. Furthermore, the durable construction of the winch, which includes heavy-duty gear and a strong steel cable, contributes to its long-term reliability and performance.

The design of the 94559 also emphasizes user comfort and ease of use. The winch is equipped with an ergonomic handle for manual operation and features a lightweight chassis, making transportation straightforward. Its ability to be mounted on various surfaces further enhances its versatility, allowing users to adapt it to their specific needs.

In conclusion, the Harbor Freight Tools 94559 electric winch is a well-rounded tool that combines strength, safety, and user-friendly features. With its powerful performance and robust design, it stands out as an essential tool for anyone needing reliable lifting capabilities, whether on the job or in personal projects. This winch exemplifies Harbor Freight's commitment to offering value without compromising on quality.