Hunter Fan 83004 manual D11, D12, D13 D14, D15, Existing Construction accessible only from below

Existing Construction – accessible only from below

D11 EXISTING FAN

D12

F

Remove an existing fan and check to make sure the	Move the housing into position above the ceiling
opening is large enough to accommodate the new motor
housing (9”x 9.75”).

D13	D14
	2
	1

Route wires through strain relief. For supply connection,

use wires suitable for at least 90˚ C (194˚ F).

Attach existing ducting to duct connector. Tape joints.

If ducting does not fit securely,

an adapter may need to be purchased.

D15

F

Screw pre-loaded screws into joist or framing.

41950-01 3/13/2006

05-HF-010-Eng_3.13.06.indd 15

15

3/12/06 5:20:44 PM