Preventative Maintenance

W a r n i n g

TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING:

1.Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer at the phone number or address listed in the warranty.

2.Before installing, servicing, or cleaning the unit, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely attach a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhaust- ing of gasses through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s guideline and safety standards,

such as those published by the National Fire Prevention Association (NFPA), and the American Society for Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall(s) or ceiling, do not damage electrical wiring or other hidden utilities.

6.Ducted fans must always be vented to the outdoors. Keep ducting as short and as straight as possible.

7.Acceptable for use over a bathtub or shower when connected to a GFCI protected branch circuit.

8.Install fan at least 5 feet (1.52 m) above the floor.

9.Never place a switch where it can be reached from a tub or shower.

10.This unit must be grounded.

C A U T I O N

1.For general ventilating use only. Do not use for ventilat- ing hazardous or explosive materials.

2.To avoid motor bearing damage and noisy/unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.DO NOT install this product in a wall. This product is designed for installation in ceilings up to a 12/12 pitch (45 degrees). Ductwork must point upward.

4.Please read specification label on product for further information and requirements.

W a r n i n g

DISCONNECT

ELECTRIC

POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE SERVICING UNIT

A clean fan provides better service. Disconnect the power supply and clean the fan as listed below.

TO CLEAN GRILLE: Use a mild detergent, such as dishwashing liquid, and a soft cloth. DO NOT use abrasive cloths, steel wool pads or scouring powders.

TO CLEAN FAN ASSEMBLY: Unplug motor cord from receptacle. To remove motor plate, find the single tab on the motor plate (located next to the receptacle). Push up rear motor plate tab while pushing out on the side of the housing or insert a screwdriver into the slot in the housing (next to tab) and twist screwdriver. Gently vacuum fan, motor and interior of housing.

METAL AND ELECTRICAL PARTS SHOULD NEVER BE IMMERSED IN WATER.

MAINTENANCE

The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, replace the motor with the exact service motor. You should replace the impeller at the same time.

2	41787-01 1/11/2006

81004 specifications

The Hunter Fan 81004 is a versatile and stylish ceiling fan that blends functionality with aesthetic appeal. Designed with modern homes in mind, this fan is perfect for a variety of decors, making it a popular choice among homeowners looking to enhance their living spaces.

One of the standout features of the Hunter Fan 81004 is its powerful motor. It is equipped with a Whisper Wind motor that operates quietly, providing strong airflow without the distracting noise often associated with ceiling fans. This makes it ideal for bedrooms, living rooms, or any space where tranquility is desired. The fan also offers three speed settings, allowing users to customize their comfort levels easily.

Energy efficiency is another significant characteristic of the Hunter Fan 81004. It is designed to consume less electricity while delivering optimal performance. This not only helps in reducing energy bills but also contributes to a more sustainable lifestyle. The fan is compatible with standard light fixtures, making it easy to add additional lighting options.

The build quality of the Hunter Fan 81004 is exceptional. It features a robust metal construction that ensures durability while retaining an elegant appearance. The fan comes with a range of blade finishes, allowing homeowners to select a style that complements their interior design. The blades are also well-balanced, reducing wobble and ensuring smooth operation even at higher speeds.

Installation of the Hunter Fan 81004 is user-friendly, as it includes all necessary hardware and detailed instructions. Its versatile mounting options allow for both standard and close-to-ceiling installations, accommodating various room heights and layouts.

Moreover, the Hunter Fan 81004 features a modern aesthetic with sleek lines and an attractive finish. It enhances the room's overall decor while providing essential cooling. Some models even come with a remote control for added convenience, allowing users to adjust the fan speed and light settings from anywhere in the room.

In conclusion, the Hunter Fan 81004 is a well-rounded choice for those seeking a combination of style, efficiency, and performance. Its whisper-quiet operation, energy-saving capabilities, and attractive design make it an excellent addition to any home, ensuring users enjoy comfort and elegance in their indoor environments.