Fujioh BUF-04J operation manual Replacing the light bulb

Page 8

replacing the light bulb

One 40W light bulb can be installed in this range hood.

Prior to replacing the light bulb, purchase an ordinary mini-light bulb (in the base diameter 17mm: intermediate base), rated 120V - 40W or below.

1

2

Unscrew 2 screws fixing the lamp cover, and remove it.

Replace the light bulb with a new one.

NOTE: When replacing the bulb, wait until it has cooled off before removing, or you may burn your hand.

3 Fasten the screws firmly after closing the lamp cover.

8

Image 8

Contents Range Hood Safety Instructions Page Name of parts On OFF HI OFF LOWHow to use Operating the Range HoodCare and maintenance Re-assembling CleaningDisassembling Replacing the light bulb Inspection label Requesting servicePrior to requesting service Specifications Circuit diagramParts list Limited product warranty Mode D’EMPLOI Instructions DE Sécurité Précaution No menclature Utilisation Fonctionnement de la hotte d’aspirationEn tretien et maintenance Remontage DémontageNettoyage Remplacement de l’ampoule Etiquette d’inspection Recours au service aprés-venteAvant de faire appel au SAV Fiche technique Schéma de câblageListe des pièces Ga rantie limitée du produit