Texas Instruments TAS5066PAG manual EVM Warnings and Restrictions

Page 4

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of xxx V and the output voltage range of xxx V and xxx V.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than xxx°C. The EVM is designed to operate properly with certain components above xxx°C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User’s Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address:

Texas Instruments

Post Office Box 655303

Dallas, Texas 75265

Copyright 2004, Texas Instruments Incorporated

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User’s Guide Important Notice Products ApplicationsEVM Important Notice EVM Warnings and Restrictions Read This First About This ManualRelated Documentation from Texas Instruments Part Number Literature NumberContents Figures TablesTAS5066-5111D6EVM Features PCB Key Map OverviewTAS5066-5111D6EVM Features −1. Complete PurePath Digital E SystemPCB Key Map −2. Physical Structure for the TAS5066-5111D6EVMPage System Interfaces −1. Recommended Power Supplies PSU Interface J901Description Voltage Limitations Current RecommendationsPin Number Net-Name at Schematics Description −3. J903 Pin DescriptionPSU Control Interface J902 Loudspeaker Connectors J100 − J600 Control Interface J50 −6. J50 Pin DescriptionDigital Audio Interface J51 −7. J51 Pin Description−8. Clock Rates LrclkPWM Timing, Interchannel Delay Registers Register Description Value hex AddressProtection Short Circuit Protection and Fault Reporting Circuitry Device Fault Reporting−1. TAS5111 Error Signal Decoding OTW

TAS5066PAG specifications

The Texas Instruments TAS5066PAG is a highly efficient Class D audio amplifier designed for high-performance audio applications. Known for its advanced technology and robust features, it is part of a series that is widely used in home audio systems, professional sound equipment, and automotive audio devices.

One of the standout features of the TAS5066PAG is its ability to deliver high power output while maintaining low distortion levels. It is capable of providing up to 300W per channel at 4 ohms, making it a powerful solution for driving high-performance loudspeakers. With a total harmonic distortion plus noise (THD+N) rating as low as 0.01%, the device assures clean and clear audio reproduction, which is critical in high-fidelity audio systems.

The TAS5066PAG utilizes a digital input mechanism that supports various audio formats, including I2S and PCM, which allows for versatile integration with various digital audio sources. This feature streamlines the design process for system builders and reduces power consumption by eliminating the need for multiple digital-to-analog converters.

Another significant technological advantage of the TAS5066PAG is its integrated power stage. This integration simplifies circuit design by reducing the number of external components required, subsequently enhancing reliability and reducing the overall size of the audio system. Additionally, the device includes advanced thermal management features that ensure safe and stable operation under varying load conditions, which is especially important for high-power applications.

The TAS5066PAG also offers flexible feedback and control options. Its adaptive feedback loop technology provides real-time adjustments to the audio signal, further improving performance and reducing distortion. This adaptability makes it suitable for a wide range of uses, from consumer electronics to professional systems.

In summary, the Texas Instruments TAS5066PAG is a versatile and powerful Class D amplifier that combines high-performance audio output with advanced digital processing capabilities. Its low distortion, high efficiency, and integrated design elements make it an excellent choice for audio engineers and designers focusing on creating high-quality audio systems. Whether used in home theaters, musical instruments, or automotive audio, the TAS5066PAG sets a high standard for modern audio amplification solutions.
Top Page Image Contents