Telular SX3e Plug In Your Telephone, Connect Your Telephone, Place a Call Adjust Your FWT

Step 2. Plug In Your Telephone

The Phonecell SX3 lets you connect up to 5 pieces of standard telephone

equipment into a cellular network. Follow the steps below for quick installation.

Connect Your Telephone:

1)Locate the modular (RJ-11)line port on your phone and plug in one end of a standard (RJ-11)phone cord.

2)Connect the other end of the cord to the RJ-11 port on the back of your Phonecell SX3e – see Fig. 6.

Place a Call – Adjust Your FWT:

1)Pick up the phone receiver and listen for dial tone.

2)If you hear dial tone, make a call.

3)While you’re talking with the other party, listen for static and echo. If you hear either, move the antenna until you find the spot where voice conversation is strong, and static and echo are minimized.

NOTE: If you are unsuccessful in dialing out, it’s probably due to one of the following:

•The antenna location needs to be adjusted – see Step 1, page 6-7.

•The NAM/Phone Number needs to be set up – see Step 3, page 9-11.

•Your cellular phone number has not been activated – contact your cellular service provider.

Adding More Phones?

Plug in an RJ-11 line splitter (not sup- plied) to connect additional phones to your FWT – see Fig. 7. NOTE: you can only make one phone call at a time.

Additional Telephone Equipment:

If you plan to use a device other than a telephone with your Phonecell SX3 (such as a modem), make sure that device will work with a normal wired telephone line.

Fax Machines – Connect a fax machine the same way it needs to be set up for use on a regular wired telephone line.

PBX/KSU Systems – PABX installation should only be performed by experienced telephone technicians.

Fig. 6

To RJ-11 Port

Phone Cord

(	)
To Phone s

To

Modem

Line

SplitterRJ-11

Port

Phone

Cords

Fig. 7 Optional RJ-11 Line Splitter lets you connect additional phone equipment to your Phonecell SX3e.

IMPORTANT!

Make sure the wiring from the telephone equipment to your

! Phonecell SX3 is properly protected from all transient voltages, including lightning.

PHONECELL SX3e AMPS 8 USER MANUAL