"3 in 1" function
This appliance is equipped with the "3 in 1" function, that allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.
Select the "3 in 1" function before the set of a washing programme.
Once this option is selected (indicator light illuminated) it will remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function can NO longer be changed. If you want to exclude the "3 in 1" function you have to cancel the programme setting (see chapter "Starting a washing programme" - "Cancel a washing programme in progress") and then deactivate the "3 in 1" function.
In this case you have to set a washing programme (and options) again.
Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)
1.Press the On/Off button. The On/Off indicator light illuminates (setting mode).
If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.
3.Press function button 4, the indicator lights of function buttons 1, 2 and 3 turn off while the indicator light of function button 4 goes on flashing.
4.Press function button 4 again, the "3 in 1" indicator light illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the indicator light turns off.
"3 in1" function active | indicator light on |
|
|
"3 in 1" function not active | indicator light off |
|
|
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
NOTE: if the drying results are not satisfactory we suggest that you activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be possible with the "3 in 1" function active.
Activation/deactivation of the rinse aid dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, the rinse aid indicator light on the control panel is automatically activated.
1.Press the On/Off button. The On/Off indicator light illuminates (setting mode).
If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.
2.Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.
3.Press function button 2, the indicator lights of function buttons 1, 3 and 4 turn off while the indicator light of function button 2 goes on flashing, the digital display
indicates the current setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
4.To change the setting, press function button 2 again, the digital display indicates the new setting.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
6