Zanussi LU7PDP, LS7EP, LU7ADPWS, LU-7, 503021, 503020, 503022 dimensions Zanussi

�For LU7ADPWS, the two resin containers automatically alternate during regeneration to provide non-stop washing. When the regeneration salt container is empty, the machine sounds an alarm. 100% of rinse water regenerated with no pressure drop during rinse to ensure full detergent removal and sanitisation of items.

�Load bearing frame, top, front and side panels panels, control panel, base, tank, washing chamber, tank filter, basket support, washing and rinsing arms and jets and screws are all made of 304 AISI stainless steel. Double skin insulated walls.

�Three different wash cycles depending on the type of tableware to be washed and the level of soil, ensure optimum washing performance. All cycles can be programmed. The 3rd cycle can be re-programmed to perform a longer & hotter rinse for HACCP compliance or a lower temperature

for rinsing crystal glasses. Soft Start system incorporated to offer additional protection to delicate items and increase wash pump reliability.

�The one-piece pressed double-walled tank has rounded corners and no welds, joins or screws in the area in contact with the water. The new 2 pieces wash tank filter can be removed without taking out washing and rinsing arms to facilitate cleaning.

�Thanks to the new electronic board a fault diagnosis system is activated and the appliances are pre-arranged for HACCP connection. The electronic board includes a digital display of rinse and washing temperatures.

�Temperature thermometer indicating both wash & rinse temperatures, and rinse aid dispenser.

�A self-cleaning cycle is possible, just pushing a button, to wash and

FRONT LOADING DISHWASHERS

LU-7

sanitize the machine using hot-fresh water. Boiler can be drained for periods of non use. Quick initial heat-up time due to pre-heating of wash water via boiler.

�The machines are supplied as standard with the following: 1 plate basket (CEP 18P), 1 cup basket (CET 24), 1 wire basket for pizza plates, trays and utensils and 8 cutlery containers (CEP 460). Further baskets are available as accessories (see the specific technical sheet).

�Pre arrangement for external detergent dispenser.It is possible to add the detergent dispenser on site.

�For machines without drain pump it is possible to add the drain pump on site.

�All models comply with the standards required by the main international approval bodies and are CE marked.

*Declared actual cycle duration times can extend when water supply temperature is lower than indicated

OPTIONAL ACCESSORIES
ACCESSORIES		MODELS
	LU7PDP	LU7ADP	LU7ADPWS
	503020	503021	503022
12 L EXTERNAL MANUAL WATER SOFTENER	860412	860412
8 L EXTERNAL AUTOMATIC WATER SOFTENER	860413	860413
BASKET F.16 VERTIC.GLASSES (H70MM)-BLUE	867023	867023	867023
BASKET FOR 12 SOUP BOWLS 240MM-GREEN	867000	867000	867000
BASKET FOR 18 DINNER PLATES 240MM-YELLOW	867002	867002	867002
BASKET SEMI-PROFESSIONAL 500X500X190MM	867024	867024	867024
COVER GRID FOR SMALL/LIGHT ITEMS IN RACK	867016	867016	867016
DETERGENT PUMP KIT	864218	864218	864218
FILTER FOR PARTIAL DEMINERALIZATION	864017	864017
FILTER FOR TOTAL DEMINERALIZATION	864015	864015
HACCP PRINTER KIT FOR UC, HT AND POTW	864002	864002	864002
INTEGRATED HACCP KIT FOR UC, HT AND POTW	864001	864001	864001
KIT 4 PLASTIC BOXES FOR CUTLERY-YELLOW	865574	865574	865574
KIT HACCP EKIS	922166	922166	922166
KIT PRESSURE BOOSTER FOR RINSING WATER	860415
KIT TO MEASURE TOTAL/PART.WATER HARDNESS	864050	864050	864050	ZANUSSI
WIRE BASKET-PIZZA PLATES,TRAYS,UTENSILS	867045	867045	867045
WIRE BASKET (550x535) FOR UTENSILS	867046	867046	867046
				P R O F E S S I O N A L
YELLOW CUTLERY CONTAINER	864242	864242	864242

www.zanussiprofessional.com

EACA1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.