Fixing to the adjacent units
To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied.
Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure.
Secure the brackets to the adjacent units with the 3.5 x 16 screws using the upper or the side holes.
The appliance must be secured to the underside of the worktop using the brackets provided. Failure to do this could cause damage or injury.
Attention!
The sides of the dishwasher must never be drilled to prevent damage to hydraulic components.
Kitchen plinth adjustment
To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table.
According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those most frequently used in the kitchen furnitures.
Height (a)*
II54 |
II59 |
a
|
| 170 160 150 140 130 120 | 110 | 100 | 90 |
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 40 | 136 |
| 131 |
| 125 |
| 118 |
| 110 |
| 100 | 93 | 85 | 75 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 50 | 135 |
| 131 |
| 125 |
| 118 |
| 110 |
| 102 | 92 | 85 | 75 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
)* | 60 | 137 |
| 132 |
| 125 |
| 118 |
| 110 |
| 102 | 94 | 85 | 75 |
|
|
(b |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
70 | 138 |
| 134 |
| 128 |
| 120 |
| 110 |
| 104 | 95 | 85 | 75 | X | ||
Depth |
|
|
|
|
| ||||||||||||
80 | / |
| 139 |
| 130 |
| 124 |
| 115 |
| 105 | 98 | 88 | 78 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 90 | / | / |
| 138 |
| 129 |
| 120 |
| 110 | 100 | 90 | 80 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 100 | / | / |
| / |
| 135 |
| 125 |
| 115 | 105 | 95 | 85 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(*) dimensions in mm 600 mm minimum
X
Dimensions of the cut on the plinth
II15
b
25 | INS48en |