Installation instructions, Water supply connections

Installation instructions

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance

should be carried out by a qualified plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Water supply connections

This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the technical specifications (page 2).

Your local Water Authority will advise you on the average mains pressure in your area.

The dishwasher features fill and drain hoses which can be

turned either to the left or the right to suit the installation.

The locknut must be correctly fitted to avoid water leaks. Do not use, for the connection, old hoses which have

been used in another appliance.

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. This will prevent deposits of sand or rust clogging the inlet hose filter.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it if necessary with a clip.

2.Hooked over the edge of the sink using the special curved plastic guide provided.

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

			1	2	3
Ø	21		8		4 cm
	21				min

		Ø	1
			1

				max 100 cm	min 30 cm max 100 cm
CS09

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Ø 18	Ø 21
		30 cm	100 cm
+ 2 m max		min	max
CS14

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown

- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

13 A

CE04

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol

or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local

Service Force Centre.

IZZI specifications

The Zanussi IZZI is an innovative and multifunctional kitchen appliance designed to enhance the culinary experience. With its sleek design and advanced features, it caters to the needs of modern households. The IZZI stands out for its versatility and convenience, making it an essential addition to any kitchen.

One of the main features of the Zanussi IZZI is its multifunctionality. It combines several cooking methods in one appliance, including grilling, steaming, roasting, and baking. This allows users to prepare a wide range of dishes with ease. The IZZI is equipped with multiple cooking programs, enabling precise temperature control and cooking times for various recipes.

The appliance boasts advanced technology that ensures efficient cooking. Its smart heating system distributes heat evenly, reducing the risk of hot spots and ensuring consistent results. This technology not only enhances cooking performance but also reduces energy consumption, making the IZZI an environmentally friendly option.

The Zanussi IZZI is designed with user convenience in mind. The intuitive control panel features a digital display that simplifies navigation through cooking functions. The easy-to-use interface allows users to select their desired cooking program and adjust settings effortlessly. Additionally, the appliance includes a timer function, ensuring that meals are cooked to perfection without constant monitoring.

Cleaning and maintenance are made simple with the IZZI. The inner surfaces are designed to be non-stick, making it easy to wipe down after use. Many components of the appliance are removable and dishwasher-safe, which further streamlines the cleaning process.

Another defining characteristic of the IZZI is its compact size, making it an ideal fit for smaller kitchens or apartments. Despite its space-saving design, it does not compromise on performance or capacity, offering ample space for cooking meals for families or gatherings.

Safety is also a priority in the design of the Zanussi IZZI. It includes features such as automatic shut-off and overheat protection, providing peace of mind while cooking. This makes it suitable for users of all experience levels, from novices to seasoned chefs.

In summary, the Zanussi IZZI is a cutting-edge kitchen appliance that combines multifunctionality, advanced technology, and user-friendly features. Its efficient cooking capabilities, ease of maintenance, compact design, and safety features make it a valuable tool for anyone looking to elevate their culinary experience.