Zanussi ZSF 2400 manual Using your appliance, Proceed as follows, Detergent recommendations

Page 8

Using your appliance

1.Scrape off solid food remnants.

2.Load the dishwasher. (See “How to load the dishwasher”). Pour approx. 15 g detergent into the detergent dispenser.

3.Close the door.

4.Select the required temperature.

5.Start the dishwasher by turning the programme knob to the start position.

6.Check the ﬁlters to see whether they need cleaning when the dishwasher has ﬁnished the wash.

For best results we recommend the use of Finish detergents, rinse aid and salt.

A complimentary sample pack is included in your new dishwasher.

- 8 -

Image 8

Contents S H WA S H E R Contents Important safety information Installation and servicingChild Safety During UseRinse aid dispenser Spray armCoarse ﬁlter Fine ﬁlterGeneral cleaning Cleaning the cabinetDetergent dispenser Water softenerControl panel How to load the dishwasher Instruction for test centresDetergent recommendations Using your applianceProceed as follows Fault Check Something Not Working?Service Service and Spare PartsGuarantee Conditions Standard guarantee conditionsInstallation instructions Technical speciﬁcationsUnpacking the machine If the machine is damagedUse Protecting the machine against freezingWater drainage InstallationWater inlet Power supply Green and Yellow Earth Blue- Neutral Brown- LiveElectrolux plc