Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

13 A

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

ZDI 6054 QX specifications

The Zanussi ZDI 6054 QX is a modern, fully integrated dishwasher designed to provide efficient cleaning and ease of use. With its sleek design, it seamlessly blends into any kitchen decor while delivering exceptional performance.

One of the key features of the ZDI 6054 QX is its impressive capacity. It accommodates up to 13 place settings, making it an ideal choice for families or those who frequently entertain guests. This means less time spent washing dishes and more time enjoying meals with loved ones.

The dishwasher is equipped with multiple washing programs, including Eco, Intensive, and Quick cycles. The Eco program is designed to save water and energy, ensuring that your environmental footprint is minimized without compromising on cleanliness. The Intensive program is perfect for heavily soiled pots and pans, while the Quick cycle allows for fast cleaning of lightly soiled dishes, providing flexibility based on your needs.

Incorporating advanced cleaning technologies, the ZDI 6054 QX features a powerful spray arm that ensures thorough coverage and effective removal of stubborn stains. The adjustable racks are another highlight, allowing users to customize the interior layout to accommodate larger items like tall glasses or oversized cookware. The upper rack can be adjusted to create extra space, maximizing the dishwasher's versatility.

Energy efficiency is a prominent characteristic of the ZDI 6054 QX. With an A++ energy rating, this model is designed to consume minimal energy during operation, contributing to lower utility bills. Furthermore, its quiet operation, rated at just 44 dB, ensures that it won't disturb your household during cycles, making it a fantastic choice for open-plan living spaces.

Other convenient features include a delay start option, which allows users to set the dishwasher to run at a later time, and an LED display that makes it easy to monitor cycle progress. The built-in water softener enhances performance by preventing limescale build-up, ensuring that your dishes come out sparkling clean every time.

In summary, the Zanussi ZDI 6054 QX combines innovative technology, impressive capacity, and energy efficiency, making it a standout choice for any modern kitchen. Its user-friendly design and flexible features make dishwashing a hassle-free task, allowing you to spend more time enjoying your culinary creations.