Zanussi ZKT 662 LN operating instructions What to do when, First aid for faults, What do I do when

Page 20

What to do when . . .

First aid for faults

When a fault occurs, it is possible that this is the result of a small error, which you can remedy yourself using the following notes.

Do not carry out any other work yourself, if the information below does not help your specific problem.

Repairs to the appliance must only be carried out by specialists. Improper repair work can result in conside- rable danger for the user. If you need repair work carried out, contact your specialist dealer, or our Customer Service department.

What do I do when . . .

. . . a buzzing noise is heard when a zone is heating up?

--This is not a fault.

It will stop as the heat increases.

. . . discolorations appears in the cooking zone?

--This is not a result of changes in the material, but is burned--in remnants that have not been regularly re- moved. They will have no effect of the function or the durability of the ceramic hob.

. . . the cooking zones do not function?

Check whether

--the appliance is switched on,

--the control lamps are on in the operating field,

--the respective cooking zone is switched on,

--the cooking zone power level has been set to the desired cooking--on level,

--the fuses in the house installation (fusebox) have tripped.

If the fuses repeatedly trip, call in an approved electrician.

--the safety cut--out of the cooking zones has been tripped.

. . . the cooking zones cannot be switched on?

Check whether

--the operating field is locked,

--a time period of more than 10 seconds has expi- red between the operation of the On/Off key and switching on the desired cooking zone,

--the touch surface is too large

(the finger should only be used lightly)

--the touch switch has been partly covered by a damp cloth or by a liquid.

--the operating field has been touched too early fol- lowing a mains failure (to clear the condition, switch the fuse out and then in again).

. . . the displays all go out except for the ”H” for resid- ual heat?

Check whether

--the On/Off key has been accidentally operated,

--the touch switches are partly covered by a damp cloth, liquid or something similar.

. . . the displays suddenly go out?

Check whether

--the electricity supply has been temporarily dis- connected, or has failed.

. . . after switching off, no «H» for residual heat is dis- played ?

Check whether

--The cooking zone has only been in operation for a short time, and is therefore not hot enough.

If the cooking zone is hot, please call in an approved elec- trician, or call our Customer Service department.

. . . one of the cooking zones cannot be switched off

?

Check whether

--the touch keys are partly covered by a damp cloth or a liquid.

--the corresponding cooking zone key (2) is active, i.e., the decimal point (13) is lit up.

If you call in Customer Service as a result of one of the items listed above, or as a result of incorrect operation, the visit of the Customer Service technician will not be free of charge, even during the guarantee period.

163

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ZKT 662 LN Dear Customer Content For the installerFor the user Before the first useUse and Operation Important Safety InformationElectrical safety Stop CleaningDisposal Touch Controls Built-in Ceramic HobDescription of the hob Cleaning for the first time Before the first useCooking Zone Heating up for the first timeResidual heat indicator Switching the appliance onSwitching on the cooking zones OperationSelecting the power level Switching off the cooking zonesPower level Cooking process Examples of use To switch off quicklySwitching off the hob Safety cut-outOver-cooking protec- tion Heating stage Heating time limitationSelecting the dual-ring cooking zone Switching the dual-ring cooking zone offDual-ring cooking zone Locking barring the individual cooking zo- nes Safety lock barring the appliance or Cooking zonesLocking the appliance Power level Automatic Heat--up function Boost facilitySelecting the boost facility Automatic heat--up function will not be activated if youIndicating the selected power level Changing the Power Le- vel during the Boost fa- cilitySwitching off the Boost facility Take advantage of the residual heat by the Boost facilityTimer Function Switching the Timer function onChanging the set coo- king time Calling up the current cooking timeSwitching the Timer function off When the programmed time expiresSwitching the egg ti- mer off Timer Function as an Egg-TimerSetting the egg timer Saucepans and frying pans Right cooking utensilsEnergy consumption Stain removal Cleaning and careCleaning after each use What do I do when First aid for faultsWhat to do when Technical Data Hob dimensionsCut out dimensions length ZKT 662 LNUnpacking and control Installation InstructionsInstalling into a kitchen worksurface Removing the glass- ceramic hob Installation dimensionsInstallation Electrical connections

ZKT 662 LN specifications

The Zanussi ZKT 662 LN is a sleek and efficient built-in induction hob, designed to meet the demands of modern cooking while providing a stylish addition to any kitchen. Its sophisticated design features a smooth glass surface that not only enhances aesthetics but also simplifies cleaning. With its compact size and powerful features, this induction hob is perfect for those who value functionality and convenience.

One of the main features of the Zanussi ZKT 662 LN is its induction technology, which offers rapid heating and exceptional cooking precision. Induction hobs work by using electromagnetic fields to directly heat the cookware, resulting in faster cooking times and energy efficiency compared to traditional gas or electric hobs. This technology ensures that the heat is concentrated on the pot or pan, reducing wastage and allowing for more controlled cooking.

The hob boasts four induction cooking zones, providing ample space to prepare multiple dishes simultaneously. Each cooking zone has customizable power levels, allowing users to adjust the heat according to their cooking requirements. The Boost function on each zone is particularly beneficial for quickly reaching high temperatures, ideal for tasks like boiling water or searing meats.

Another standout characteristic of the Zanussi ZKT 662 LN is its intuitive touch control panel. This user-friendly interface makes it easy to select and adjust the cooking settings with just a tap of a finger. Additionally, the hob features a timer function that enables precise cooking, allowing you to set the duration for each dish to ensure perfect results every time.

Safety is also a priority in the design of the ZKT 662 LN. With features like residual heat indicators, users are alerted when the surfaces are still hot, minimizing the risk of accidental burns. The child lock function provides peace of mind for families, preventing young children from accidentally turning on the hob.

The sleek design of the Zanussi ZKT 662 LN not only makes it a stylish feature in any kitchen but is also designed with practicality in mind. Its built-in configuration allows it to seamlessly integrate with kitchen cabinetry, providing a streamlined appearance. Moreover, the glass surface is resistant to scratches and stains, ensuring it maintains its elegance over time.

In conclusion, the Zanussi ZKT 662 LN is an excellent choice for anyone seeking a reliable and stylish induction hob. With its advanced technology, safety features, and user-friendly interface, it caters to the needs of both novice and experienced cooks alike. This induction hob brings convenience and efficiency to everyday cooking, making it a valuable addition to any modern kitchen.
Top Page Image Contents