What to do if, Problem, Possible cause and remedy

What to do if...

Problem

You cannot start the appliance or op- erate it.

The cooking zone reduces the heat setting to

A sound operates when the appliance is off.

The residual heat indicator does not come on.

Heat setting alternates

A sound operates and appliance starts and stops again. After 5 seconds one more sound operates.

comes on

and number come on.

come on

Possible cause and remedy

•You touched 2 or more sensor fields at the same time. Only touch one sensor field.

•There is water or fat stains on the control panel. Clean the control panel.

•The child safety device or key lock operates. See the chapter Operating the appliance.

•Start the appliance again and set the heat setting in 10 seconds.

You covered one or more sensor fields or there is water or fat stains on the control panel. Uncover the sensor fields. Clean the control panel.

You covered one or more sensor fields. Uncover the sensor fields.

The cooking zone is not hot because it operated only for a short time. If the cooking zone is supposed to be hot, speak to the After Sales Service.

The Power management is active. See the section Power management.

You covered . Uncover the sensor field.

•The automatic switch-off operates. Stop the appliance and start it again.

•Overheating protection for the cooking zone operates. Switch off the cooking zone. Switch on the cooking zone again.

•No cookware on the cooking zone. Put cookware on the cooking zone.

•Not correct cookware. Use the correct cookware.

•The diameter of the bottom of the cookware is too small for the cooking zone. Move cookware to a smaller cooking zone.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some time. Discon-

nect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the After Sales Service.

There is an error in the appliance, because a cookware boils dry or you use not correct cookware. Overheating protection for the cooking zone operates. The automatic switch-off operates.

Switch off the appliance. Remove the hot cookware. After approximately 30

seconds switch on the cooking zone again. should disappear, residual heat indicator can stay. Cool down the cookware and check it with the section Cookware for the induction cooking zone.

If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care De- partment. Give the data from the rating plate, three-digit- letter code for the glass ceramic (it is in the corner of the cooking surface) and an error message that comes on.

If you operated the appliance incorrectly, the servicing by a customer service technician or dealer will not be free of charge, even during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet.

ZIT64X specifications

The Zanussi ZIT64X is a modern induction hob designed to deliver both efficiency and style in your kitchen. With its sleek design and intuitive features, this appliance stands out as a reliable cooking companion for any home chef.

One of the main features of the Zanussi ZIT64X is its advanced induction technology. Induction hobs utilize electromagnetic fields to heat pots and pans directly, rather than the cooking surface. This results in rapid heating and precise temperature control, allowing you to bring water to a boil in mere minutes. Moreover, the induction technology ensures that the surface remains cooler, reducing the risk of burns and making it easier to clean.

The cooktop has four induction zones, which vary in size to accommodate various cookware. Each zone is equipped with a power boost function, allowing for an immediate increase in heat for quick cooking tasks. This feature is particularly useful when you need to rapidly boil water for pasta or sear meats effectively.

The touch controls of the Zanussi ZIT64X are user-friendly, providing an effortless way to adjust cooking settings. Each zone can be individually controlled, giving you the flexibility to prepare multiple dishes simultaneously. The digital display also provides clear feedback, so you can easily monitor heat levels at a glance.

Safety is a priority with the Zanussi ZIT64X. It comes with a child lock feature, preventing accidental changes to settings and ensuring peace of mind in homes with young children. Additionally, the hob is equipped with an auto shut-off function that turns the appliance off if left unattended for a prolonged period, further enhancing household safety.

Another notable characteristic of the Zanussi ZIT64X is its sleek and elegant design that seamlessly fits into modern kitchens. The surface is crafted from high-quality glass, which not only looks stylish but is also durable and easy to maintain.

In summary, the Zanussi ZIT64X is an induction hob that combines cutting-edge technology with practical features. Its quick heat-up time, easy-to-use controls, safety features, and contemporary aesthetics make it an excellent choice for anyone looking to upgrade their cooking experience. With this hob, every meal preparation becomes an efficient and enjoyable task.