Zanussi ZGG649 user manual What to do if…, Cleaning of the spark plug, Periodic maintenance

Page 9

Make sure you position the pan supports correctly after cleaning.

To make burners work correctly, make sure that the arms of the pan supports are in the centre of the burn- er.

Be very careful when you replace the pan supports to prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth. Removing the dirt:

1.Remove immediately: melting plastic, plastic foil, and food containing sugar.

Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shi- ny metallic discolorations. Use a special cleaner applicable for surface of hob.

2.Clean the appliance with a damp cloth and some de- tergent.

What to do if…

3.At the end rub the appliance dry with a clean cloth. In order to properly place the pan supports, make sure that the arms of the pan support are positioned in corre- spondence with the hole placed at the base of the burner. This way, the pan support will be stable and fixed.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to check the conditions of the gas supply pipe and the pres- sure adjuster, if fitted.

Problem

There is no spark when lighting the gas

The flame is blow out immediately af- ter ignition

The gas ring burns unevenly

Possible cause

There is no electrical supply

Burner cap and crown are placed uneven

Thermocouple is not heated suffi- cient

Burner crown is blocked with food residues

Remedy

Make sure that the unit is connec- ted and the electrical supply is switched on.

Control the fuse. If the fuse is re- leased more than one time, refer to a qualified electrician.

Make sure that the burner cap and crown are in correct positions.

After lightning the flame, keep the knob pushed for approximately 5 seconds.

Make sure that the injector is not blocked and the burner crown is clear of food particles.

9

Image 9
Contents Gas hob ZGG649 Safety information ContentsDisposal of the appliance InstallationKeep the minimum distances to other appliances and units To prevent the risk of physical injury or damageInjectors replacement InstallationAssemble the parts, follow the same procedure back- wards Gas ConnectionReplacement of the connection cable Adjustment of minimum levelElectrical connection BuildingPossibilities for insertion Operation Product descriptionCooking surface layout Ignition of the burnerHelpful hints and tips Care and cleaningTurning the burner off Energy savingsPeriodic maintenance Cleaning of the spark plugClean the appliance with a damp cloth and some de- tergent What to do if…Hob recess dimensions Technical data Hob dimensionsLabels supplied with the accessories bag Heat inputEnvironment concerns Gas burnersBy-pass diameters Packaging material397195501-B-2010