Building the appliance in under a worktop
The dimensions of the recessed installation area must correspond with those indicated in the figure.
| 600 | |
| min | |
870 | 550 | |
600 | ||
- | ||
820 | a | |
| ||
| 600 | |
| b | |
S.I.004 |
|
The appliance could be inserted between two units
(a) or as an end unit (b).
If the appliance is to be installed between two units with a matching furniture door/support panel, the door/panel must be fitted to the adjacent unit using suitable hinges (not supplied) before the appliance is installed.
UPPER | LOWER |
D326 |
|
1.Fasten the side panel to the rear of the appliance with the fixing brackets.
UPPER | LOWER |
E |
|
| E |
D319 |
|
2.Fasten the appliance to the worktop or the sides, applying the sealing strip between the refrigerator and adjacent cabinet using the fixing brackets (E).
30
S.I.006
3.The appliance is equipped with adjustable support feet. To adapt the appliance to the height of the installation area (max 870 mm), screw in, or screw out the feet situated at each bottom corner.
A
B
C
D
PR266
4.Separate parts A, B, C, D as shown in the figure.
15